First step, new refrigerator configuration, is done. Next is wood floor (bamboo), then new microwave/oven combination in the wall above the...
Our boat has CATs so not a comparison for RPM but have on 24x26.5 3B and have run 22x28 4B. The 4B were 1 kt faster at cruise 24-vs-23 and at WOT...
Post intakes are molded part of the hull. Two horizontal slot openings with top inside hull open for air.
See, yes. Access, not so much. They are up behind the sound insulated engine room side panels.
Was wondering if the Post inlets are supposed to have ducting to keep the water out (like Viking inlets) that could be missing on our boat.
The CATs normally cruise 23 kts at 2400 RPM (2900 is max, up from 6-71's) and 36-37 gph at 70% load. On glass smooth it is slower (same as my...
Does your Post get water in the engine room coming in through the hull side air intakes? The just installed thru hull that is aft/below the port...
Wind was about 16 knots off the port stern beam. The 3 side enclosure was up, with the front cracked a bit to get good ventilation. I don't...
I am continually impressed that the post is 8 feet longer and nearly 20,000 lbs heaver than our prior Viking. It runs 30% faster on the same...
