Keep me posted with your timing if headed off shore. I'm in Sag Harbor right now, and I'll be headed out around Montauk around 10/20 and headed...
Your cruise is 10 knots. Enjoy it. 11 is available without stress, but the fuel begins to burn exponentially, and the engines feel the effort....
They'd have a tremendous little run buying back their fleet from the 60's and 70's, refitting them to modern spec, and re-issuing hull numbers....
If the Smart Y is Charles, it will ONLY work if both legs of 50 are in phase. The Hubbell will work on one leg, and if the phasing is wrong on...
Very, very similar to the Burger that got me hooked, a 65' 1963, originally Flying Tiger. [ATTACH]
Don't accept this process as legal advice. You'll want help in preparation of the MOA, any Affidavits for the entity such as approval to enter...
You need a Registered Agent located in Delaware as the agent of record for the entity (such as LLC). YOU can still manage the entity, essentially...
I've used John Teeto at Teeto Signs. He's in FLL.
I'm with you, Pascal. I run 30's in the Racors and 10's on the mains. I'm also extremely diligent about consuming oldest fuel first, always...
Both of my cords are 5 pin. I carry two 5 to 4 adapter pigtails. I also carry two or three smart Y double 50's for the ability to pick up 100...
In my regular Marina in Florida I added a buck boost to the switch room for my circuit. I boosted the 208 coming from my breaker through the...
Yes, my cords are 5 pin as well. Most often I use the 5-4 adapter where we find single phase 100 amps on a dock. Again, and sorry, I’m tired,...
Interesting question re two cords at different voltage. But would seem to not matter. If you can get one cord into 480, I wouldn’t think you’d...
I don't really understand how or why you'd have a 3 phase setup with 208 per leg, but essentially it's delivering 208 via three different phased...
Ive got Atlas. I regularly plug into 4 pin and 5 pin setups. Atlas handles 480v without an issue. Converts it to single phase, and sends it to...
5200 doesn't like UV. The proper installation, to me, would be to bed with 5200, clean the residue well, then beauty bead the exposed edge with a...
Yes. Turbo, cooler....something either not producing or obstructing ramped up air requirements.
Prop speed, application technique is critical. But divers merely wipe the surface to clean. Rarely if ever do they need any tools to remove any...
I'll chime in to suggest you consider a completely separate system, cameras in the cockpit, up on the tower, engine room, etc. Perhaps a...
I ask because it keeps my rates down in the 1% range, actually a hair under. Yes, I spend more than that on seasonal dockage alone, but in...
