That’s not a diaphragm pump but a bellows pump with duckbills on each end which act as check valves. No reason to have these check valves in the...
First of all what kind of pump do you have ? you don’t need check valves in the system, I don’t think I v ever seen any. The vented loop at...
You should be able to replace the blower only. Is the AH original or has it been replaced already? The old cruisair stuff was really good and...
You don’t need the primer if using Awlwood on a solid coating. I ve used it over existing epoxy/awlgrip. Not it works over varnish. I think the...
i always use the clear primer
I ve tried a number of coatings over the years including Clear Awlgrip over West 105/207, Ceylon, Bristol and various varnishes For the last 4...
And when 10 years ago I couldn’t find a good looking day sailer here in Miami, I grabbed a blank sheet of paper, designed and built this:...
that’s why these two are in our garage. The first one was an in house design at Jaguar, the second by legendary Italian designer Giugiaro...
The delta 80 shows that it s not about being obsessed with classic looks but that modern can be gorgeous as well again it s about proportions...
No. I would not. And that isn’t limited to boats but includes cars as well. aesthetics are important to me and Proportions have to be right....
One thing though... if using these for generators make sure They have holes on the back side so pressure can’t build up under way. And make sure...
Replacement pump depends on what you have right now. Most quality boats over 50/55 typically use a Headhunter Mach 5 120 or 240v These pumps...
good idea. Whoever pulled the shaft should have checked that the strut is lined up correctly. I had this issue on my boat when we repowered....
There is just no way that overfilling the fresh water tank could result in a toilet overflowing. Makes no sense. when asking technical...
Indeed the bigger the strainer the better even if that mean using bushings to fit the smaller hoses. another option is to fit mesh strainer thru...
It’s been about 8 or 10 years since I ve been up there. Annapolis obviously. You re too big for moorings but I ve anchored there off the naval...
Each pump and chiller has its own breaker inside the cruisair cabinet. For some reason Cruisair set up the whole thing to be fed by only two...
Indeed control delays can be a real pain in the butt. In a tight slip, once you re in the boat has nowhere to go so I m not a stern thruster...
With a chiller system air temp readings at the air handler isn’t that important as it is completely dependent on the chilled water temp. to...
Thread title is chiller troubleshooting... so obviously talking about a chiller system. Not remote condensers
.jpg&contenttype=jpeg "Click for Abeking")