Hi, Do you have vacuum gauges on your Racors? If so what is the difference between clean filters and the time when problems arise. If the...
Hi, Now you have the line dis connected it should be a relatively straight forward deal to use a Vacuum Gauge and see what happens and where.
Hi, Another reason to have a thorough survey. With classed vessels major events will be able to be extracted from the Class records etc.
Hi, Good that you have found a painless solution. Also very good that you have posted back with the solution - this may well help someone...
Hi, A 1 1/4" NPT Thread is very close to 1 5/8" when measured with a tape measure/ruler.
Hi, My kind of car, unfortunately they are very popular here in Europe, leasing is also a lot more expensive and for those who aren't based...
Hi, On the face of it it seems to be a bit of double dipping but who knows till you ask. Take your glasses with you when you go as it might...
Hi, Can you reuse the gauges that are mounted in it? If so I would imagine it would be possible to have a piece of Alu Plate milled and...
Hi, For a short term fix can you not build some support for the unit behind that will reduce the load on the faceplate?
Hi, I think you would be better off contacting the manufacturers of these yachts instead of posting the request to represent them here in this...
Hi, Ron, that link has been in this thread for a few days now. http://www.yachtforums.com/forums/162314-post87.html davidwb - I clicked...
Hi, Welcome to YF. You might benefit by rereading this section of the rules you would have accepted when registering. Rules Regarding...
Hi, Tend to change them on condition, got a pair of 3516's rated at 1492 kW at 1600rpm. Done 1600 hrs from new in 12 months with current set...
Hi, Those clouds are a commonly used way to show a change on a drawing. It is very hard when reviewing the same drawing 10 times to pick up...
Hi, Where do you get the idea Mylin IV is 53m? The yacht it replaced was 51m, unless it has been shortened it should be 60m - a big yacht...
Hi, This might indeed be the case if the Priming Pump you have referred to in your previous post is a SW Priming pump. If it isn't then if...
Hi, If they run well and make the rated speed in neutral you should look at the props and how heavy the boat is now compared to how it was when...
Hi, I am assuming it is the SW Pump impeller you have replaced which has got nothing to do with the fuel system. When I started reading...
Hi, Try these for a start. I got this off the Hatteland Website. IEC 60945 4th (EN 60945:2002) IACS E10 BV ABS DNV GL
Hi, The first of the big AUSTAL Catamaran Ferries was built in a hole in the ground, when finished the end was opened up and the water came in,...
