Check your ground too. I recently had a similar issue in my dinghy with an F25 on it that turned out to be bad ground to the gauges.
There weren't any problems I was addressing other than a couple of family members who aren't comfortable with the boat rocking. The rest of what...
It wasn't a DIY per se. A naval architect was consulted on structural loads being placed on the boat. I'm not certain how much work was done on...
For the work on the props it was only a question of returning them to spec. Camber was way out on the props and it appeared they had been worked...
No, not at all. I'm happy to give ground on top speed. I am not willing to give ground on rated RPM as I don't want to overload the engines....
The Seakeeper being on and locked, on and unlocked or altogether off doesn't seem to have any impact at all. Ben
Thanks for the insight. This morning I removed the dinghy and went for another test run. When I removed the dinghy the stern came up about an...
Hello all, This winter I installed a Seakeeper 9 on my 2003 Carver Voyager 570. The stabilizer is as far back as it can be on the center line in...
For me as a buyer it was definitely less likely to buy if the boat had pods. I'm not concerned by the increased / easier maneuverability, but the...
As others have indicated the only 50' bridge boat or motor yacht Cruisers made was the 5000 Sedan. It's an okay boat but they stopped making them...
I've learned a good bit as well. I was able to verify that my stateroom AC unit is a modulating unit as was mentioned earlier in the thread. So,...
Bill, Thanks for the info. Definitely helpful. For the salon and pilothouse the condenser is FX-48RC1 with R22 (I was mistaken earlier) and it...
Yes, I'm quite sure I'm operating it correctly. For the second evaporator (air handler) regardless of the fan speed being controlled...
Hello, On my boat I have CruisAir SMX split-gas AC system. The Salon and Pilothouse are served by two separate evaporators but there is...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")