Hi Dan, The gelcoat in the affected area will have to be ground down to reveal the bare FRP underneath. Apply Awl Fair and rough sand and shape...
+1 on Flagship. Excellent quality and customer service. Now just convince them to Awl Grip their units because they resist doing this for some...
Sorry about that, The shop is located in American Custom Yachts facility and ACY's receptionist can give you the updated number / 772-221-9100....
They all have problems then. It seems like the Cat dealers are a bit more hanky than Fl.DDA is. I have problems with any company that charges $130...
After looking it up it seems that I was a bit premature in my response: Apparently NOT the same stuff. Bakelite used paper in lieu of fibers for...
Same stuff but the resins have become a lot more advanced since the Ma Bell telephones. It was used as a insulator by electrical companies and I...
Thread serts cause more problems than solutions in situations like this as its just another failure point added to the equation. I find G-10's...
Best suggestion yet! Maybe a step further with a 5 gallon pail of diluted antifreeze on the raw water pump suction side. Winterize the entire raw...
Have your laminator glass in a 2"x 2" block of G-10 or Garolite if you have room for clearances. G-10 taps like steel due to its density and...
C-7 motors as well as the C-9's are plagued with HEUI pump failures. Even with Cat's updates the pumps continue to fail after 1000 hours or more....
You don't need ZF for replacing your flexible coupling. Any good pair of marine mechanics can accomplish this. U need to inspect it for cracks...
ZF Marine in Stuart, Fl. 772-463-0888 ZF Miramar's satellite office for service on the treasure coast.
Thank you, My first thought from memory was closer for Med. speed RPM. I stand corrected. Never thought I'd see a diesel turn 3500 + RPM or so...
Yeah, I recon a 3516 would be considered a medium speed diesel with max RPM @ 1800 so my estimate of 7 to 1200 RPM's for medium speed would be off...
Huh? Low speed diesels are 600 RPM max, could this possibly what your talking about? I've never encountered any 3500 series motors as such. Low...
Cats been on their game for quite some time now, fifteen yrs ago I had a engine room with 3516 -C @ 2,131 bhp. Cat 3516 -C (HD) rated 3,000 -...
You wouldn't have to do anything license wise as your commercial license will suffice for working aboard a yacht as long as your within your kw...
Maretron and Noland have analog to NMEA 2000 system data converters that will work with your LZE's
Its temporarily stowed up there for the Atlantic crossing to the Caribbean in lieu of towing it across the pond.
Archie @ diesel engine traders has 213 MTU turbo's available with the majority for series 60. He has two left hand and one right hand in stock for...
