Thanks! Putting it on my spring work list (moved to marina for winter last weekend).
Is it possible to remove/replace the aft tank fuel level sender without having to cut an access hole in the cockpit floor? The sender on mine...
Galley floor done in Bamboo. I've done other wood flooring, this was the most challanging with NO 90 degree corners. Good to get the old and...
AP is Garmin 20. Garmin tech came and redid the (prior owner) setup. He showed me how to access the dealer only setup we used, there is no mention...
The new wood is mahogany panels and teak trim. We used a "Gunstock" color stain. It is a little more red than the original (even on the side...
Range hood is a Broan CRSF1 Here is model data plate info. [ATTACH]
My hood runs on the galley and stateroom 120V light circuit (as does the refrigerator when on 120V). Range/oven has it's own.
The hood was installed when we got the boat. I don't have a reference for it in my manuals box. I can look for a name or model next time I'm...
You can't directly set gains. The AP "learns" from the setup wizard and sets them internally.
Ran day trip to St Michaels yesterday. Way out was glass smooth. I decided to play with the tabs a bit crossing large boat wakes at different...
Yes planning a micro/convection set into the wall above the fridge. The old cooktop/oven will go. A new radient cooktop will go into counter....
First step, new refrigerator configuration, is done. Next is wood floor (bamboo), then new microwave/oven combination in the wall above the...
Our boat has CATs so not a comparison for RPM but have on 24x26.5 3B and have run 22x28 4B. The 4B were 1 kt faster at cruise 24-vs-23 and at WOT...
Post intakes are molded part of the hull. Two horizontal slot openings with top inside hull open for air.
See, yes. Access, not so much. They are up behind the sound insulated engine room side panels.
Was wondering if the Post inlets are supposed to have ducting to keep the water out (like Viking inlets) that could be missing on our boat.
The CATs normally cruise 23 kts at 2400 RPM (2900 is max, up from 6-71's) and 36-37 gph at 70% load. On glass smooth it is slower (same as my...
Does your Post get water in the engine room coming in through the hull side air intakes? The just installed thru hull that is aft/below the port...
Wind was about 16 knots off the port stern beam. The 3 side enclosure was up, with the front cracked a bit to get good ventilation. I don't...
I am continually impressed that the post is 8 feet longer and nearly 20,000 lbs heaver than our prior Viking. It runs 30% faster on the same...
