You might have some luck if you conatct the Herreshoff Marine Museum in Bristol R.I.
Marmot, I agree that polishing will no get the tank walls if you use one of the smaller fuel polishing systems. There are larger "industrial type"...
Have you looked into having the fuel polished? This is a method that is used by a lot of boats. A portable machine is brought to the boat and the...
I am not sure of numbers but atendance seemed on par with previous shows, and there seemed to be a lot of serious people there on Thursday and...
If it is fresh Awlgrip it is sometimes possible to paint the white right over the existing paint. I don't advise this though. I advise that you...
It's not a problem to go from a dark color to a light color. The process is the same with any paint job. The cost is dependent on where you are as...
Try Scandvik
I have used this method on Awlgrip, Awlcraft, Alexsea, gelcoat etc. with no ill effects.
I have found that grey/black spots on Awlgrip or even gel coat is sometimes attributed to acid rain. You can do a quick test by wiping an area...
Sorry I spoke to quickly this boat is a Stephens design but built by Choey Lee
I believe you are referring to the Motor Yacht Trilogy. She is chartering now and you can Google her to come up with some info. I did a bit of...
I have had great luck with Naiad stabilizers
I have to agree with K1W1, at this point steer clear of Awlgrip. Alexseal seems to be far superior.
If it's a fiberglass tub you can have re-gelcoated, most boat yards with a good paintshop should be able to handle this.
You may want to try an auto parts store for the rod end assemblies. I have had luck going this route in the past.
I would use some neoprene rubber, you could probably glue it down with a little 5200 just to keep it in place
You should be able to get 10+ years on an Awlgrip job. Awlcare is nice but regular dishwashing soap works just as well. Use lots of water during...
I would have a welder "clad" weld them.
After blasting you should use what ever system a paint manufacturer suggests. DO NOT try to save money and use different fillers primers etc. If...
The is no real rule about where the straps shoul be placed, you best bet would be to place one strap just aft of the engine but forward of the...
