W are going to give it a try.
Found a self-standing desk that folds instead of attaching to the counter wall. WIll replace the casters with felt or glide feed to drop a couple...
I hadn't considered it. I think I would need to find a way to fold and store it too, and it would need to be pretty large. I suggested a taller...
Need to come up with a design for a folding desk so my wife can telework from the boat. I was going to put a dekstop with self-supporting folding...
I will be using a V3 on the Trio flatmount. Interested in skin/core thickness so I can have correct length fasteners already on hand. I want to...
I'm getting plans ready to install Starlink on our 43 when it comes home from winter storage. Looking at the hardtop where I can see from inside...
I believe they were too low, would dive and launch a wall of water on the 3rd wave of a set. I think they also exagerated the roll when crossing...
After much discussion we decided to remove the 'original owner added' spray rails. My best guess is they were put on based on experience from the...
I usually use a metal etch on metals prior to primer after sanding. Check OSPHO for ferris metals, including stainless (it's the one currently in...
I plumbed our dryer (located in the head cabinet above the toilet on a 43) to use the same hull exhaust as the head exhaust fan. A one-way valve...
One option: Undercut the opening by about 1/4-3/8". Make a carefull wood template and clamp in place, then ease up to the final cut using the...
The doors on my cockpit cabinets are actually clear acrylic painted on the outside to march the cabinets. Can see the screws inside the acrylic on...
There is a speed sensor at both the input and the output. They also have their own dedicated ECU's.
Thanks.
That's interesting that the deadrise ahead of the engines of your 43 is lower than our 43-II. I've heard the 43-II has a deeper forefoot, which...
Thanks. Have been away on the boat for several days. I thought of a hook but didn't look at mounting on the side. I'll have to see where that...
I removed the old cold plate unit and remote compressor. Current is an Isotherm bi-75 self contained unit. I had a new cover plate made to match...
Only fish will be leftover crabs from the resturant. I looked at a couple of the folding springs. Need to see if the cover interior...
It is a food and mostly drinkg refrigerator. I don't think there is space on the side for a gas spring. I haven't looked at the folding spring...
What do you use to hold the cockpit refrigerator cover open when accessing inside? Haven't thought of a solution. We have a vertical load...
