Thanks guys. Amazing work by father and son team at Gulf Fiberglass. Re-cored with coosa board and doubled up in the center for the same height...
The rest-
The bow had rot in the balsa core from the pulpit mounting bolts, a project I knew would need to be addressed at the time that I bought the boat....
Sorry just realized I never updated this thread. So the 26x28 3-blades went on and she flew right up to 26 knots in the spring... With 1/3 fuel...
Looks similar to my set up but mine is horizontal. My hot water heater is under the galley setee where some boats had the washer/dryer. I moved...
Are you getting any fluctuations in tap/shower temperature when the pump kicks on and off? Looking at the Jabsco instructions you linked, I may...
Where did you source the replacement boots for the ram shafts?
I've never seen them on a Post, new or old. I'd guess they're an add-on.
Gotta tell us where you got the helm cushions. They look great!
Post 46 with 6v92's the turbos are Garrett T18A90's. There's been some modifications to the exhaust by the previous owner and I've got about 3/4"...
Got the old couch out so I could lift the hatch and align the engine properly. Going to be another few weeks before anything goes back in the spot...
Thanks a lot
Does that shed water reasonably well? Not looking for totally waterproof like a tarp but some rain shelter is good
Great advice thanks
I'm leaning strongly toward doing it, looks like it should be pretty easy.
That's just what have in mind, probably with snaps to make it a continuous attachment at the front and to shed rain
I'm looking to build a cockpit awning for sun shade. Looking for examples of what fellow Posty's have found for this application. I want to do...
Wondering why all the underwater metals are connected to the internal bonding system except the rudders. When I hauled out in the Fall the rudder...
Lots of parts are common from builder to builder where they sourced their hardware, etc. What kind of parts are you looking for?
Newer ones were made by Bomar, not sure about the 42. Are yours wood or aluminum?
