Super shots Dan ...
The problem with the engine controls must have been an intermittent issue, otherwise the Captain would have engaged reverse much earlier and prior...
Assuming it is a problem with the engine controls, the onboard engineer should still be able to stop the engines applying the emergency stop.
+1 Excellent post Meister ... you certainly know your business. I understand why you call yourself Meister. @ Captain Ralph ... I purchased the...
MTU specify that MTU 2000 engine cylinder head bolts should have a maximum shaft length of 212mm. As long as the bolt shaft length is below 212mm...
The MTU cylinder head fasteners are bolts.
Gentlemen ... Good morning and I wish you all a healthy and prosperous 2021. The MTU engine has now been reassembled, tested and is running...
I have spoken extensively to the MTU engineers, local as well as at HQ and all the issues you are suggesting if they had taken place will register...
The cylinder head bolts are torque-angle bolts. The original bolts were measured and the shaft length was below the max. length of 212mm.
The engine block deck is perfect. It might just be an illusion in the image.
Thanks for the information Meister. If angle torqued cylinder heads bolts which is the case in these MTU engines cannot be re-torqued after a...
Prince Charles in dry dock. [ATTACH] [ATTACH]
Thank you NYCAP. I am also curious to read the replies to your 2 questions. I can find no reference in the manuals to retorquing head bolts on MTU...
All 12 cylinder heads on the port engine have already been removed. I will have the starboard engine cylinder heads re-torqued which isn't...
Capt. J, what do you mean with an engine "getting cold"? If you a referring to freezing temperatures, in our part of the world it is never cold....
Your suggestion is correct and I also mentioned it to the MTU mechanic but unfortunately he had already removed the cylinder heads. It would have...
The local MTU dealer has removed all 12 cylinder heads and all 12 gaskets will be replaced.
Thank you Gentlemen for your feedback. Incorrect torque settings of the cylinder head bolts is the only logical cause behind this failure....
That was my theory and argument as well, but is that possible on a factory assembled engine?
Gentlemen .... good evening, Three cylinder head gaskets in the same cylinder bank on a 2016 MTU 12V 2000 M94 engine failed which led to a severe...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")