If the chiller runs fine under genny, but breaker fails under shore power....well, you're mind has nowhere to go but to suspect low voltage...
I'm pretty sure your fuel pressure needs to be closer to 80-85. Consider inspecting the lines, fittings along the way for possible access to air...
Pascal, check out Embark app from Cmap? I've switched over to CMap chips on my systems, and I'm much more comfortable overall with their...
Lol, nothing like popping out of the pilot house to catch glimpse of the lone dock hand holding your vital spring line in his hands as if he's...
I'm 68 feet currently, and I often single hand. Doing so takes detailed planning, some scheming aboard for line placement, and the hope that...
....the backing plate will help to spread the load over a larger area if you impact your rudder against debris in the water...it's a worthwhile...
If you remove, make sure there's no coring in that mount location. Be sure that it's solid glass. Also, don't fill large voids with 5200. You...
Well, not if they're still tied up and dragging in the water from the last port. A dockhand can grab them on your approach. What could go wrong...
I lose data units from time to time, not often. But when I do, sometimes a restart works. Other times after restarting and maintaining the error...
Agreed. The Technicold units spin up gently, and I can watch my amperage draw dial up with them. There is no spike. There is no old fashioned...
The best question has been asked. Does the problem persist when under generator power? Eliminate voltage as a variable.
If the problem in voltage is dockside, take a walk and check the plate on the marina transformer. Likely it's converting to 208, coupled with...
This. Take a look to see if the cathode was painted by mistake. Happens from time to time.
I can run both chillers, cook, and wash clothes. Have you looked at the status of the water heaters? Are they creeping up with amperage demand?...
My chillers have temp controls that monitor the chiller loop as it passes each chiller. The temp settings are staggered so that only one unit is...
Or sometimes the compressor just gets hot, and the breakers are sensitive to load. On the rare occasion that my breaker trips on the #1, I know...
Didn't he say that it was tripping the breaker as opposed to signaling a code? There are times when my Technicold units will trip the breaker as...
If there is a trial, if the case is not settled outside of the courtroom, we'll find out. Allegedly a law suit was filed against the yacht, the...
In rough seas I find that I am far more focused on my own vessel and her behavior/well being than I am hunting down alternative rides on the near...
While reading my first guess was that the freon leak was within the heat exchange plumbing, and the gas displace water and created a lock within...
