The boat is still in the yard but the shaft is straight so it must be the bronze body is cocked or maybe the lipseal is going bad. It does not...
Blue Water Shaft Seal Thats just for the seal. Hard to believe.
Chatfield Marine Bluewater Shaft Seals Okay guys the shaft seals are made by Chatfield Marine and are called Blue Water Shaft Seals. Evidently...
Capt J it does have a bronze body.
Prop shaft seal Number 2 shaft seal
Not sure what kind of seal it is but its not a PSS. What does Cabo normally install?
How do you check the rotor to see if it is cocked. Do I take the shaft seal apart? I'm sure the rotor is the correct size since the other side...
Marmot, Thanks for the reply. We did put a dial indicator on the shaft and its out about 3 thousands but that could also be the couplers not...
Yes the marina can go to a larger gauge wire normally required to increase amperage to 50amp. Also a new pedestal would be required unless they...
On my Cabo the starboard dripless seal housing around the shaft seems to wobble on the shaft whereas the port stays still. What might cause this...
Explain to me how these shaft tubes work. If I could get that kind of fuel improvement I might try them to.
Boat Speed How long have you owned the boat? What was the speed or rpm before this? Has the boat been sitting for awhile without running....
Prop pitch reduction cost What should I expect to pay to have the pitch on my props reduced by 2? From 28x39 to 28x37. Thanks
During the summer we have the bottom cleaned every week otherwise you're going to get barnacles.
Props Capt J, Thanks for the info. Skip
BMS - if you think Savannah water is bad come on south to New Smyrna/Daytona area. Yes I use prop speed and its a great product. Barnacles will...
I can't tell you the cup right now although I have it from my last prop scan. You gained 120 - 130rpm which is what I hope to gain. Did the...
I want to reduce the pitch on my 28x39 4 blade nibral props as my boat is turning 100rpm + less than the recommended 2300 min. Typically speaking...
Man school today Went to the Man engine school today. Very helpful and informative. Learned how to change oil, filters, fuel filters,...
Sure hope they had some good trim tabs. :)
