Venture, 2005 and yes the transmissions are electronic.
Started wiring the new Brookhouse multiplexer so I can view my VHF GX2150 Standard Horizon AIS on the E120 screens and need help. To start with...
CaptJ, Just had the same thing happen a couple of weeks ago. Called SeaRecovery and they said to remove (unscrew) salinity sensor white wire...
I have trolling valves on my 43 Cabo with 900 Mans and its no problem adjusting the speed down to where you are barely moving. My max speed using...
Since buying my boat of 6 yrs now it has used Mobil 1 Delvac 5-40w synthetic in the engines and trans (ZF350A). A while back I called ZF because...
Because we were in the Bahamas and the mechanic that fixed the first engine was not a regular Man mechanic.
Well it happened again. Out 25 miles running to fishing grounds and both engines shut down to idle speed. Two years after the port engine oil...
Here's my comment. Call the local Man engine mechanic for that area and ask him your questions. Mine was more than willing to share some of Man...
Thanks guys great input on the stationary prop. Next time will tie it off, use vise grips or chain vise to hold it. I do have a large pipe...
Larry, Thank you for the excellent job and outstanding service. It was also a pleasure from my standpoint. On any future canvas or upholstery...
It looks like I need to replace the electric motor on the SeaRecovery low pressure water maker. Can someone tell me how to remove the electric...
The bottom is already painted with SeaHawk Islands 44 and must be repainted with the same type of paint unless I have it sanded. It has lasted...
Bottom Paints The best ablative I have found is SeaHawk Islands 44 but you have to purchase it in the Bahamas. It will last at least 2 years in...
I'm replacing the vinyl combing pads on my Cabo. I ordered the new vinyl and will use the old foam as it is in excellent shape. The backing...
AC line cleaning Here in Florida all the marine AC contractors I've used (3) before flushed the systems with muriatic acid. It maybe because...
C4ENG Do you put the March pump directly in the bucket? By the way that pump puts out 8.5 gpm which is 510 gph or about the same as the pump I...
Typically every year I flush the boat A/C lines to remove anything that may have attached itself to the inside of the copper lines by mixing 25%...
Thanks, you are correct that is what they recommend in the manual as I just read it again. The engines and trans have had Mobil 1 Delvac 5-40w...
I don't believe it has an external filter at least I've never seen it. Will confirm with the manual.
I see it in the bilge below the port trans and into then into the area between the two engines. I have a diaper under the trans just haven't...
