15kw Generator Issue May have found the issue. I had accidently turned off the 240v ac onboard battery charger before leaving the dock and the...
Pascal you have the scenario correct. While running the gen shutdown shutting off all ac power. Restarted gen and noticed that dc meter inside...
Beau, My error, the gauge normally reads approx 26 volts. This is the salon gauge. I believe this just shows the normal starting and operating...
Hey Ralph I am a pretty good electrician just haven't done much with a generator? Mostly house wiring.
Went fishing yesterday. After approx 8 hrs of gen running all of a sudden 110/240 power shutdown and gen shutoff. Today checked oil, water,...
I have the twin 900 racors on both engines and normally run 10 micron filters although when I first got the boat I used 30 micron. I set the...
I change my racors approx every 100 hrs. Today I decided to remove the bottom brass plug on the racor to drain some diesel out to see if it had...
If you read the post again I never stated that it tripped.
No he said if it trips put a bag of ice on top.
He attributed that to the themostat being off 11 degrees. The end of the telephone conn on the compressor was slightly corroded and causing the...
Yep thats what the tech said. He also said if it trips set a bag of ice on top of compressor.
Ac Okay problems resolved. The salon unit was hot because it was slightly low on freon. Had small leak at nut. Both thermostats also needed to...
Good deal will have the tech come by. The salon is the coolest and front ac is not as cool. The front ac only had a difference of 6 degrees...
Both units are beside each other in the eng room. The hotter unit is cooling the salon which is closer. Today I shot the return air and the...
Got the infrared heat gun to measure the tops of both 16k A/C units. The top of one unit was 169 degrees and the other 96 degrees. Both units...
Going to purchase a laser infrared thermometer. Not looking to spend a fortune just one that works well. Also, what will be the highest temp I...
Yes Brian is who quoted me the 8k.
Thanks guys the 8k quote was just to flush the HE not remove & clean them. I am getting a quote from another Man service co. to remove & clean...
I am due to have my heat exchangers cleaned 800 hrs (several years). My local Man mechanic quoted me 8k to have them flushed with barnacle buster...
Will do, probably won't have a chance until next weekend.
