Okay got it done and everythings working fine. Used a 60amp 24 to 12v dc converter.
Okay what size amperage would this 24dc to 12vdc converter need to operate. The Clarion APX 480 amplifier states it has 80w per 4 channels, but...
I have 6 batteries total. 2 eng 4 house. They are wired in series for 24v. Each set of two is connected in series and the two sets of house...
Beau, Sorry we were out of town for a day. The gen ran fine for 6.5hrs under load. I shut it down after that. Will be monitoring it on my next...
15kw Westerbeke Okay guys I'm back. Well the gen ran for approx 2 hrs and everything seemed normal. Not sure what to think. Maybe a lose...
15kw Westerbeke I am positive it hasn't sucked up anything as nothing is in the strainer and its putting out alot of water. This particular...
15kw Westerbeke Gen Okay performed test on what I believe to be the oil sensor. Question is there appear to be two of them right on top of each...
15kw Westerbeke Performed first test although not sure what its telling me. Disconnected the two wires going to the cooling (I believe) sensor...
Okay looked over the gen and I believe I have found two. The cooling system by the thermostat and the oil. Not positive but will experiment....
Westerbeke 15kw Capt J & Marmot Okay my first issue is locating the 3 sensors. Went through the parts diagram on the internet and not sure I...
Rcrapps never got the light working and gave up on it. I stick a 120v plug with light in the outlet on the bridge so I can see if its running or not.
Westerbeke 15kw NYCAP123 - water flow is great and no overheating. Gauges confirm as well as I shot with ir gun. Seastrainer clean. Capt J -...
My generator seems to run for 10-20 minutes and then start sputtering and die. If I hold the preheat switch down it will continue running. Any...
SR AquaWhisper 900gpd watermaker Okay heres my solution. Ordered another pump from Beard and replaced it where it was. Sprayed pump with CRC...
Watermaker Pump There is not a leak coming in. Its a small amount of water when cleaning strainers, etc that flows to a small area in the bilge...
My lower pressure pump has gone out twice now because of its location and being susceptible to salt water spray. Its located in the engine room...
Goose, Just pulled off the cover and checked the fuse that was there although it was good. Thanks for the suggestion will keep trying. Skip
Will take a look and check under the metal box cover. Hope your right that would be great.
Goose, Its a Westerbeke, but could still be the same problem. So your saying on top of the actual generator there might be a fuse that the green...
RC, Heading down somewhere around the end of May to Spanish Wells, Harbour Island for a week or so, then up to Abacos for a few days at Seaspray...
