Maybe add one? Kidding, of course... Second the take on CMap and CMap Vector. They've treated me well. This week, however, the chart didn't...
Doing this right now. Made a jig, routing out a clean gap where the joint separation is located, filling with West System while leaving a small...
not exactly right-space-friendly.
....I have a library of Burger data in this class range, but this is not one of the boats I researched. A lot of knowledge about the boats in...
Sparkman Stephens. Hargrave all had pilot houses forward.
I was fortunate to have the time and patience to really dig into the empty shell that I bought. I was able to locate areas structurally where the...
1750 RPM 18 Knots 21 GPH 1800 RPM 18.5 Knots 22 GPH 1850 RPM 20 Knots 23 GPH 1900 RPM 21 Knots 24 GPH 1950 RPM 22 Knots 26 GPH 2000 RPM...
Yes, not only this but when you choose the units you want to use, go make a template and walk it into place from the dock before you make the...
Same user. Repowered from the DD 8's with Allisons to Cat C15 with TD. Main salon floor and all interior cabinets and walls were nidacore. Main...
I did post several things on Sam's forum with regards to the build. It took place from 2007 to 2010 with some very helpful input from Slane....
Perhaps grab a starter button and wire everything direct, bypass the boat systems to remove other variables?
Can you move the crank shaft at the front pulley?
Camera on phone with a flash?
Lithium batteries burn white hot.....just adding that piece to the discussion...
Yes, it's used intermittently to allow your engine to use multiple battery banks as you start. You need to determine the load rating for this...
Yes, it looks very much like a standard parallel starting solenoid for smaller engines. But basically its merely a solenoid. The small wires...
No worries, and glad the issue was quickly resolved. We took pneumatic tools to my hinges to free them from binding, and one set of pistons had...
Thank you. Yes, old photo taken as the airbuses were being remounted. Walker took some abuse during the effort, but all were changed when we...
I installed one to avoid the holding tank/metal boat dilemma. I use a small plastic tank as a lift station with an automatic float switch and...
A truck mechanic can get it through Phase 1 of the due diligence.
