Can you still have Halon on a yacht?
RPM has an effect on Voltage that is why when a heavy load is suddenly applied the voltage will drop till the engine catches up and when a sudden...
I am guessing your Genset is 60hz. If the frequency fluctuates this might indicate a speed change. A voltage change at constant speed could be an...
Does the frequency fluctuate at the same time?
No worries then
I posted that because if the OP thinks he lost refrigerant he either lost the plot on what his engine did and or doesn't know **** from shoe...
Its of one of the first Series 2 3516's used on a yacht. I have recently heard of a quote to clean a pair of them from a CAT Dealer in Fl at...
Really? Get someone who knows what they are doing and what to look at to help you.
You will do the same with one today as you would have done 50 yrs ago, point it at a heavenly body you can identify ,record the observed altitude...
I know , That's where I first saw them. Our project has been running for a while now so maybe things have changed but that was the answer 12...
I tried to get these used on an H and H plant. The answer was a firm NO. To many problems and too easy to damage by untrained folks adding gas...
I did a bit of googling for that model and year and see that a few similar ones had the CAT3126 Power. This was not a good product line for CAT....
I don't know if either De Vries or Van Lent brought stuff from SA but I do know they have sub contracted out Hull and superstructure work since...
There is quite a difference between being resident and having a residence, you may want to ask the Owner to clarify his/her own particular...
If he is no longer a UK resident he should be able to cruise there no problem subject to the length of time he wants to stay there per year, if...
If it is only going to be cruised in the EU by a private non EU resident I do not see where it needs to have CE Certification. This is a whole...
They could be something like this inserted from below the flat bar: http://www.memfast.co.uk/shop/Vprod2.asp?cat=2252003316 If so it should be...
It sure looks in the photos like there is Alu that sticks up right to the level of the fibreglass. This is why I suggested using a thicker flat...
I tend to agree with CaptJ that what you have theRe was made for the job in the quantity required. It should be fairly straight forward to remove...
Pasta, canned stuff , bottled water and long life milk and you can stave off starvation for quite a while. Sailboats do not travel in straight (...
