Well after cleaning it all up again and starting engine found a small leak in the transmission oil cooler by the oil fitting. It was dripping...
Capt J, I actually cleaned that whole area up a couple of days ago before going out on Sunday. It does appear to be something to do with the...
Aluminum for sure. Read website below for details. http://www.defender.com/html/zincs_info.html
Today after coming in I found oil under the back of the transmission and on the back of the pump. Couldn't really tell what was leaking but felt...
My transmission coolers have hose barb fittings on them as well as the dripless seals. Really no pressure. I now remove the hose once a year...
Capt J - Didn't notice any color. TK - that could be it. I'm sure it would require the most aggressive one. May call them this week. Thanks guys.
In November 2015 I had the boat painted in S Fl. Also, had the running gear cleaned and painted with Pettit Prop Coat Barnacle Barrier. It held...
If your going to tackle this job be prepared it will take some time and its not easy. Best to hire a professional but if you want to do it...
Capt J is right on. I have the CR900 and my fuel burn is 60gph at 26 knts. Thats about 1850-1900. Fuel burn really doesn't change much from...
I carry an extra coolant pressure sensor. 51.27451.0125 Under M&M Controls its there 060G1122 MBS3000 0-2.5 4-20ma if you use the same one...
I've found a place to purchase the Man engine sensors at a savings should anyone be interested. Good service and about 1/2 the cost of here....
Thanks appreciate the instructions.
Tom, Just had the compressor replaced on one of my ac units last month. Because of space restraint we had to remove the unit out of the boat and...
Okay the pressure regulator valve knob. Knock on wood no issues there and it stays at the 850 number. I have 528 hrs on it. Only use it on...
Okay great. I had the screw out and actually tried slightly prying on that slot but was unsuccessful and didn't want to break it. That's how I...
Captholli, Yes, same membranes actually for 11 years as it was installed when the boat was new. It does have a manual back flush that I use once...
PSW I have the Sea Recovery 900 gpd unit in the Cabo. It has been a good unit overall. Never in 9 yrs have I replaced anything other than the...
Ok sort of did that but will try it with a little more force on the existing old sensor. I'm not able to remove the sq cover on the new...
Went to replace the Danfoss sensor and wanted to check the wiring that is in the female harness connector as I did once before and found a loose...
Yes they normally do the Man training at the time of the FL boat show. I attended it in Pompano a few years back. It was less than a day but...
