Anyone know off hand what Freon the SZ model 249FF uses. The unit is a 2005.
I removed the fan tonight and checked it with 120v power. It worked so something else is not sending it power when its suppose too. Trying to...
Just went out and removed enough to see that the fan is not working as the unit had already started icing up. Not sure how to replace the fan as...
The SZ freezer is one unit about the size of the two drawers. My SZ refrigerator has two drawers. I cleaned the coils underneath the unit this...
My sub zero freezer temperature is only going down to 10 degrees. Do these freezers sometimes need an additional Freon charge. Its been like...
Assuming you have 120/240v power. Be sure both 120v legs have power at the pedestal. Then check to see if you have both 120v legs on the boat.
I used PropSpeed for the first 7 yrs of ownership although last year changed to Prop Coat by Pettit. Have had good success so far. What I found...
Definitely going to keep. The impeller for this pump is 3.75" so not sure its the same size pump (09-814B impeller).
Capt J, The Johnson pump is a F9B9 but I cannot find anywhere that sells the o rings. Can you provide a place to purchase? Thx, Skip
Thanks guys for the education on rudders. Went to the boatyard today and measured the rudders. From center rudder post to center rudder post...
PacBlue, Thanks for the information. It is a 43 Cabo. Typically, I lower the tabs before going up on plane. Don't have too but it seems to...
The other day I ordered o rings for my Johnson impeller pumps. They don't use a gasket. Okay no big deal order them from a Man dealer. Cost...
Thanks guys great info and I think its clearer. So the tow in position means the leading edge of the plate rudder is actually closer together,...
Why would they move this to the Cabo forum. Its a generalized question not specific to Cabo?
[ATTACH] Here is a diagram from Cabo of how my rudders should look. Can someone explain it to me. What is the wedge rudder and what is plate...
Thanks I talked to them today. They can definitely make it. Looks like my old cooler is repairable. The radiator shop said the metal was fine,...
Unfortunately the trans cooler was a custom made model for Man. It evidently was used on the CR first year only.
Your best bet is to be extremely careful when your running in shallow water. Know the color of the water. Watch the water depth and know your...
PSW thanks for the info will do that.
Will have the existing cooler checked out to see if it can be braised. Called several companies in S Fl and NE US to see if I can find the...
