My Eskimo is 220v and my cockpit freezer is 110v. Looking at your pictures the higher pump appears to be real close to the waterline. If my...
This is the 115v freshwater pump I have in the Cabo and it has worked well. $495...
PSW you should be able to feel the pump running if you put your hand on it. On my Cabo the Eskimo March pump was mounted incorrectly and I had...
Sorry about that for some reason they didn't post. Anyway jumped the rheostat so it no longer is active. Wired orange and pink wires together...
Maybe rheostat is the wrong terminology but it came with the cruiseair system. I'll post a picture.
If I could find one in this area that would be great. Only one and he's tied up through the month of May. Subzero recommended I find an...
Well so much for that short lived success. The past two days the freezer temperature has been 18-20 degrees. I ordered a new thermostat control...
No I used a regular ac temperature thermometer.
Here are 3 pictures of thermostat and wiring from evaporator. Any ideas on how to bypass the variable speed control so its wired straight on high...
I on the SA$A ZBC v berth ac control the bottom knob turns the fan up/down. I'm not able to tell a difference in the fan speed so not sure...
Outside air temp 80. On this compressor their are two evaporators. One for the front v berth and one for the master suite. I measured return air...
No restrictions and all filters are clean. I have the r22 press/temp chart in my manual and that's what I've been using. I have the superheat...
The compressor was running at least an hour when I checked it. So what is the recommendation to raise the compressor temperature? Remove some...
Water cooled ambient temp 80.
The high side was 185. The superheat numbers were both about the same number 42 (maybe 4 deg difference) which I'm thinking should be 10-12 if I...
Not an ac tech just an owner that was taught how to flush & charge his units. Since marine ac companies are so busy its impossible to get them...
I have two 16k R22 units. The top of one compressor runs approx. 100 degrees the other one about 55 degrees. Both are cooling but 55 degree...
On my recent 43 haul out I'm pretty sure there was only 3 on each side. Total weight 48k.
Based on a few your feedback & some online videos I decided to replace the defrost timer and defrost terminator which I ordered from...
Yes got the evaporator fan working but evaporator coil area is frosting up and freezer temp starts climbing. I've ordered a defrost timer and...
