Wow, crazy night. I wish I didn't just watch your video. My wounded vets are arriving tonight and we head out in the am. Unfortunately a weather...
See my first post above, you should be focused more on WOT RPM than speed. Lots of things will affect speed (wind, current, weight, bottom...
The speed is one thing, the bigger issue is you are only getting 2046 RPM when you should get 2300 MINIMUM. Houston we have a problem.
Curious why you are opposed to running with tabs down? Sounds like the stern lift from tabs down gains you speed and therefore efficiency?
Easier to use a buoy and ring to raise the anchor for a boat that size. Then you just coil the rode into a bin.
You can't blame the head itself for poor winterization. If you have people clogging a macerating toilet I can't imagine what they would do to a...
Did you direct the stocks you wanted your Edward Jones advisor to buy? If so, why are you paying an advisor? The S&P is up 12% YTD and 28% last...
I’ve ridden shotgun seat in Beavers many times. Although visibility isn’t fabulous, it’s not that bad either. Even when heavily loaded and before...
Given all the refit and upgrades you are doing I strongly recommend you ditch the VF heads and go with the Raritan or similar as Pascal mentioned....
I believe I could have but elected to replace everything.
I went with a Sea Star electric powered HPU. It replaces engine driven pumps. Otherwise the components are the same (helm, tubing, tiller ram,...
‘Thanks. No intention to use anything other than 8Ds. There are widely varying CCA ratings within the 8D size group thus the original question....
It was a pretty simple one sentence question about the minimum CCA specs. Apologies if that caused you to mentally masturbate.
Yes, 1450 Cold. Actually the Full River AGMs I’m considering are even higher at 1525 at 0 degrees F
My existing batteries are AGM so no levels to check. Given I cannot be near the boat for extended periods I do not want flooded batteries. I’m an...
I read that the same way. I think I’ll just get the 1110 CCA for now to get me by until I can get better replacements for all 4. I’m looking at...
Thanks. Not sure if that is the acceptable CCA range for all the engines listed or just the CAT labeled batteries they sell?
Does anyone know the minimum cold cranking amps required for a C-18 ACERT 1150 hp with 24v starter? I have two bad batteries and need to replace...
My first suspicion would be your gear oil cooler. You may be getting water into the oil via a failed tube or similar issue in the cooler.
Why not make new frames out of aluminum or stainless? Aluminum with white powder coat would last a long time. Pretty sure you know a place that...
