I have not tested yet. Will report back tonight. Thanks
Is the Fuel Pressure reading at idle at 1500 or under load? Thanks Jimbo! Ozzy
Engine that ingested salt water through airsep is the port side. Engine that is not responding is the Starboard side. I ran the boat a over...
Thanks Ron... I will know later today when I try to run her...
I cleaned all air filters and inspected Air Box of the turbo that got salt into it. It looked good. As far as your situation, the black...
The port engine is running fine. I agree turbo getting stuck is a potential problem but has nothing to do with Starboard engine not going past...
Turbo is on the port side which is engine that is running fine. It is still spinning freely . The problem was there before fuel...
Hi, I want to share with you the observations I have been seeing after I went into the water from the 60 days on the hard at Cay Marine....
Some more pics
Well after 1 week of 25-30 knots winds I decided not to go to the Bahamas and do my oil and filter changes and also the cleaning of the front two...
Roger... Will pump all the fuel out of each tank separately, filter it and dump in the back tank. Then will rinse out with 15 gallons of diesel...
Sorry about the picture it needs to rotate cw 90 degrees. Full Flow Elbow would leave the Genny Line out no? I was thinking more of the...
Ok.. will drain and wait.. After that, how to I get the residue out? Do I pour diesel and flush it? I uploaded a picture that shows a...
No actually my front tanks are twin 300 gallons tanks that don't have fuel pickup, instead the have fuel drain.. Will post a picture in a few..
No I have never Cleaned it. Hmm.. Maybe its time? Any trick on draining it and then cleaning it after its drained?
Hi Everyone, I wanted to see if anyone has modified the front Tanks on the '54, 1980's vintage. These front tank do not have fuel pick up,...
Yes, I used at 3/4 Driver and 1 1/2 socket. Where is the stop position on the rack?
Yeah.. absolutely. The easy part is popping them off, the hardpart is tourning the engine by hand. I guess I can use the starter and turn of...
I was able to see all the cylinder walls on that side and all but one had the crosshairs on them. The Last one had a small vertical wear.
It was a pleasure. Thanks for everyone's input.
