I don't really have any pro's and con's but 3 more feet can make a difference in the ride for sure. Some things you should consider is what motors...
Have you checked the voltage at the switch? Are you getting 24v? It may be a voltage or amp draw problem. Make sure you don't have a ground wire...
I had my Viking done by Open Water Concepts out of Stuart Fl. They did an awesome job and we love it! I didn't want all the white showing between...
Orange County in Winter Park near Fairbanks and I-4
Not to highjack the thread but I have the same Onan with sound shield that I pulled out back in August. As long as you held the start button in...
Try marine connection in Fort Pierce, FL they have a ton of stuff there. http://www.themarineconnection.com/ 2970 North US Hwy #1 Fort Pierce,...
You will be happy with the Phasor. I put the 8kw with sound enclosure in my boat back in July. I used it to the Bahamas and back and it worked...
I think that most of the "Time Bomb" issues were with the 635hp DDEC's. If propped correctly (not over or under and should be 2300 - 2350 rpm at...
Keep them. I was sure glad I had them in the Bahamas 2 years ago. You hope you never have to use them but when you do you will be glad you have them.
To get really good info on the DD's there is a forum http://boatdiesel.com/. You definitely do not want to overheat a DD but as long as you keep...
That's a really sweet looking Post. I have a 43 Viking with the 692's rated at 550hp. I cruise around 17kts at 1850rpm burning around 34-36gph....
http://www.floridamarinesurveyors.us/ Noel Miley is who I used and he saved me from a bad purchase in St.Pete. He also went to Stuart and did the...
I had a similar issue with my 24 year old Onan. Never could figure it out. After spending almost a grand it was time to pull it and replace. I...
I'm at a point where it's time to replace my windlass and was hoping you guys could help with my choices. I have a 1993 Viking 43' convertible...
I found this on Amazon searching Hardlines products. It says it the "New" polish....
I been wanting to have Seadek installed on the decks but I didn't like having the white show between the panels. I cleaned the areas where the...
Mine actually has a retainer ring that needed popped out first, but I have an older boat. Definitely replace with LED's cut's down on heat and power.
If your DSM300 was has made in Mexico on the back of it they had a lot of power problems with a solder connection. The unit would shut off for no...
That's one of my concerns too. What did you use? They look nice?
We have had our almost 2 years now and have done a lot of up grades. Next week she's getting a new Phasor 8kw generator the engine room painting....
.jpg&contenttype=jpeg "Click for Abeking")