Quick update on this. Rewired the emergency generator as a secondary generator. Simply relocated the existing transfer switch and upgraded the...
Maybe a better question is, are tank levels supposed to be set at the sensors (pictured) or at the ISIS software?
As I’ve been playing with ISIS tank level calibration for what seems like forever, it dawned on me to ask, where are the previous calibrations for...
Having been in a big beam sea without stabilizers functioning, I have to admit you’re right, that day (our worst ever) would have probably been...
Admin is right, floppy swim platform (in another post) is the reason to add a davit. Pascal you had some great input on that. I’ll post a detailed...
problem with the TNT is that it doesn’t have lock so if a hose fails the platform drops.
I’ve come to the conclusion that the hydraulic swim platform is just not a seaworthy thing to begin with, regardless of manufacturer. I know many...
Anyone done the Airmar SmartBoat system? Seems to good to be true, now if I could just find a schematic for all the sensor wiring.
Love that idea, that was my first thought as well, if a sliding chock system were available, it would be a breeze. Then I'd simply add a pin...
Update, drilled out both sides of the support struts and their mounting points from 3/4" to 7/8 and upsized the bolts, huge difference. Almost all...
I read about your debacle in your post a while back. I think you’re onto something with the turnbuckle idea. My sliding chock idea is on the same...
Just replaced hoses last week, cylinders are welded so not easy to change seals but doesn’t really lend to the problem.
2006 Lazzara 74 came with a TNT lift that carries my 1000lbs Carbon Craft CC130 tender. In any head sea it moves so much I fear it’ll rip from the...
Same thing happened to me. I’m sure you figured out it was the electronic module. I decided it was safer to bypass them all then simply hold the...
This boat was originally designed for Europe and its first owner was in the Dominican Republic. I suspect it was chartered for a while and this...
Since there’s many boats with parallel generators that CAN run at the same time, I thought it was a reasonable question, of course in my case they...
What if I simply removed the protection slider from the (Gen 1-Gen 2) transfer switch allowing both breakers on at the same time? That should...
SWAG?? The second is also 230VAC (has to 115VAC legs), simply paralleling the outputs would be easy enough but I'd think they'd still need to...
By transfer switch which again the schematic is vague as to how it wires in. I believe in the pic below the transfer switch is referred to as...
The "emergency" 13.5kw does run to all the AC panels but like you said it only runs a few items in each panel. I'm looking for a way now to...
