apples and oranges? I run a boat with MAN 800CR's. I believe my filter arrangement is different from yours. I have a Racor priming pump on the...
the boat that I have captained since she was poped from the mold five years ago is sold. It is a complicated deal with a trade and travel to be...
Best of luck with the new boat. I would suggest you also get the after coolers cleaned both inside and out while doing the engine work.
45' Hargrave 2001 HARGRAVE Sportfish Power Boat For Sale - www.************** I believe this is a one off design but on paper at least it looks...
There is also a book, " All available Boats" Amazon has it. There were so many heros that day and the days that followed. The boating community...
Sorry but I don't know. All I can tell you is he installed the epoxy around six PM and I went back in the water the next morning.
PS: He realigned the engine after the strut work was complete.
Step one. Unbolt the shaft coupling from the engine. If it is alinged properly the shaft will turn with little resistance. The factory replaced...
U.S. Army Corps of Engineers®*— Jacksonville District Roland Martins Marina I made the trip ten years ago. Left Venice inlet around 10AM got...
Interesting concept Actually there are quite a few charter boats in NY/NJ that offer overnight trips. Noon to noon is the norm but the times can...
Bouy weather I have been using this site for four + years now. I find it much more accurate than NOAA most days. I also have Sirius weather in my...
Thanks. I did a quick partial read and it looks very interesting. I have given some thought to getting a used sail boat or motorsailer around...
You make a good point. I would recomend you do not change the props until the engine repair is compleated and the boat sea trialed again to...
I run two boats. One is 42' with 1600 total HP, cruising at 26 kts. and burns between 300 and 375 gal depending on the destination and sea...
Fuel for thought I am in the sport fishing end of the industry , spending one half of the year in NJ. Canyon fishing in the NY/NJ area means...
A little more info My transmissions have a 1.5 to 1 gear ratio. I have been running 22x21x4 blades with a light cup, that now after 10 years...
Viking Yachts recomends Hydrogen proxide. I use it in A/C drip pans, shower sump and builge and found a noticeable improvement. The A/c pans over...
Be careful I have 3208 TA's 375 HP in a 38' Ocean Yacht. In neutral they should spin up to 3000 RPM. FULLY loaded [fuel water gear and people ]...
Valid question and a few thoughts. Most of the responces you recieved were valid. The Price spread does reflect the current market and the job...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")