Click for Ocean Alexander Click for YF Listing Service Click for Walker Click for Westport Click for Northern Lights

Princess 50 Engine Mount Replacement in Miami

Discussion in 'Engines' started by Nick Sharma, Sep 7, 2026.

You need to be registered and signed in to view this content.
  1. Nick Sharma, Sep 7, 2026
    #1
    Nick Sharma

    Nick Sharma New Member

    Joined:
    Mar 4, 2023
    Messages:
    11
    Location:
    Miami
    Hi Folks,
    My 2009 Princess 50 Volvo D 11 A1A needs engine mounts replacement for one of the engines. The engine room is very tight and I want to make sure I get a high quality job done, hopefully at a reasonable price. Let me know if you have any recommendations. I will buy the original Volvo engine mounts in next couple of days.
    Thanks,
    Nick
  2. Pascal, Sep 7, 2026
    #2
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,929
    Location:
    Miami, FL
    Try Luis at Mesa Marine. I ve been using him for 20 years for thruhulls, mounts, alignments, shafts, etc. On my personal boat and the boats I run full time including the 110. Old fashioned guy who carries calipers on his back pocket. He also repowered my 53 hatt incl fabricating new engine beds. I ll DM you his phone nr.
    Capt Ralph and Nick Sharma like this.
  3. Nick Sharma, Sep 7, 2026
    #3
    Nick Sharma

    Nick Sharma New Member

    Joined:
    Mar 4, 2023
    Messages:
    11
    Location:
    Miami
    Thank you Pascal. I’ll reach out to him tomorrow.
  4. mapism, Sep 8, 2026 at 12:31 PM
    #4
    mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,292
    Location:
    Sardinia
    If you don't mind my curiosity, why do those mounts need to be replaced?
    Surely it isn't because of age, and if it were due to extremely high hours clocked (which is unlikely anyhow, in that type of boat), both engines would be involved...
    Defective parts, maybe?
  5. Nick Sharma, Sep 8, 2026 at 12:35 PM
    #5
    Nick Sharma

    Nick Sharma New Member

    Joined:
    Mar 4, 2023
    Messages:
    11
    Location:
    Miami
    Good question Mapism. I am getting vibrations at higher RPM. I am getting it rechecked tomorrow with Luis. We will see if it’s another reason like shaft alignment or something else. It’s only around 2000 hours. I’ll report what we find out.
    mapism likes this.
  6. Silver Lining, Sep 10, 2026 at 1:07 PM
    #6
    Silver Lining

    Silver Lining Member

    Joined:
    Sep 18, 2008
    Messages:
    177
    Location:
    Chesapeake/Florida
    Good question by Mapism. I would be very surprised if it was motor mounts. I would first thoroughly check propellers - is it pods or shafts? I would look closely at shaft straightness, and alignment before suspecting motor mounts..
  7. Capt Ralph, Sep 10, 2026 at 1:52 PM
    #7
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,522
    Location:
    Satsuma, FL
    Inspecting the mounts would normally be step one for an alignment check anyway.
    If they are covered in corrosion, loose, broken, wore out or not able to take any adjustments,,,, then any alignment would be a waist of time.

    And YES, Low hour mounts do fail.
    I have witnessed it.