2009 Azimut 58 Flybridge props: need some help

Hi,

This is Martin from South Korea. I have an Azimut 58 Fly(2009) and I need to change the props this time. It will be not hard to check the spec. of the props if the boat is on the ground, the crane will lift it after two weeks.

The problem is that I have only one or two weeks for repair including replacing the props. It might be too late if I check and place the order at that time, so it seems necessary to act before the crane comes.

Boat: Azimu 58 Fly
Year: 2009
Engine: MAN R-6 800(twin)
Shaft diameter: 70mm
Prop type: 4 blade

I know it's not enough to find the suitable props, but I hope that someone has some information(maybe an owner who has the same boat with same experience).

Thanks for reading.

Hi Capt J, thank you for your advice. I'm ashamed to say that the boat market(all 'boat things') in Korea is not so active. In most case the owners have to solve the problem by themselves. I already tried to contact the Azimut head office directly, but they turned the inquiry to the domestic dealer. Based on my experience, this guy is not so helpful and it will take at least one month to get a simple information(it's embarrassed, but this poor environment makes the owners study hard about their boat).

Thanks again for your advice.