Click for Westport Click for YF Listing Service Click for Cross Click for Nordhavn Click for JetForums

Sea Recovery 600gpd soft water?

Discussion in 'Watermakers' started by ArielM, Jun 11, 2011.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. Capt J, Jul 4, 2011
    #21
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,736
    Location:
    Fort Lauderdale
    Yeah, I replaced that as their recommendation and it still had readings all over the place......If I remember right after startup it was running around 400 ppm salt, and then after 30-60 seconds dropped down to 100-150 ppm which were in spec......They admitted that they had a lot of problems with those boards.
  2. boatguy901, Aug 19, 2011
    #22
    boatguy901

    boatguy901 New Member

    Joined:
    Aug 19, 2011
    Messages:
    7
    Location:
    Florida
    Sea Recovery

    I'm with PASCAL, be glad it works. Sea Recovery watermakers leave a lot tp be desired. Lats see,,,,,,My Aquamatic 1400 by Sea Recovery $ 14,000.00 plus install. At 98 hours, touch screen $ 980.00, main circuit board $ 1,400.00 with service call of $ 2,100.00, thats almost 5K. At 121 hours it doesn't work again. They say that they all fail and it will take $1,300.00 in parts and $ 800.00 in labor/service call to revert it back to the old technology. Lets see,,,I pay to retro-FIX there Screw Up??????? I dont think so.
Page 2 of 2