Click for Perko Click for Ocean Alexander Click for MotorCheck Click for Comfort Click for Nordhavn

AICON 64..?

Discussion in 'Aicon Yacht' started by OceanDay, Dec 29, 2020.

Thread Status:
Not open for further replies.
  1. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    Hello Folks,

    I am looking to purchase an Aicon 64. Hull completed 2009 but firsr sold in 2011 and splashed in 2012 due to Aicon factory closing during the recesion .

    Any feedback on the quality and overall experience?

    Thanks
  2. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    As an Italian, I would put it this way:
    Out of 800+ boatyards that we have had, I can think of others whose boats were better built.
    Almost all of the others, actually... :rolleyes:
  3. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    So you mean Aicon quality is no good...?
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Precisely. Do yourself a favor and find a much better brand.
  5. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    What does it make you say that?
    Have you owned one or do you know anyone who did?
  6. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Yes, I knew someone that ran a 64' Aicon. The boat was very poorly built. Many issues with the build quality and electrical.
  7. gr8trn

    gr8trn Senior Member

    Joined:
    Dec 3, 2012
    Messages:
    733
    Location:
    OR/CA
    Ivan G, I don't know anything about Aicon boats. Nada. I do read here and know that if @Capt J and @mapism say to look elsewhere that is enough for me. No questions.
    Not that you shouldn't ask. I get that a 2009 hull that didn't see service until 2012 may have an attractive price point. But the fact that the factory closed in 2012 has nothing to do with why it sat unsold since 2009. Boats don't sell because there is something wrong with them or they are overpriced.

    Is there any other reason boats don't sell?

    Again, I know nothing of Aicon boats specifically, I just don't think you are onto something.

    By all means, buy it if it the right boat for your intended use and your budget. Hire a local captain to do a pre-survey, pre- offer dock side inspection and go from there. That's the ticket.
  8. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    Can you please be little more specific? I spoke with the captain who has been running the boat on the first owner for more than 5 years and he told me only the gelcoat needs to be worked on but other than that boat was running good.
  9. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    Can anyone who owned or owns an AICON 64 can feedback?
  10. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    The fact that so little information has accumulated on YF about Aicon (over 18 years) might be another consideration. Back in the 2000s, a yacht broker named Fernando Castro worked for the US importer of Aicon and he sold a few boats. He is still in the business but representing other brands now. You can search for him online.

    CJ and Mapism are respected members here so their advice carries ballast. Also check with YF member “Liam” who has decades of knowledge about Italian shipyards and boat builders.
  11. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,119
    Location:
    Miami, FL
    8 years old and the gelcoat needs to be worked on? Either poor quality gelcoat or not maintained. Either one being a red flag.
  12. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Reinforcing Pascal’s observations, about 10 years ago I made a post about the gelcoat breaking down prematurely on these boats. I recall looking at the Aicon 85 at Pier 66 and the finish was not only chalky, but getting wavey. That boat was still relatively new, maybe 2-3 years old?
  13. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    Thank you YF. I just spoke with Mr Fernando Castro and he could not tell me anything bad about the built quality of the AICON boats. He actually said the opposite that the quality is good. I did ask him about the gelcoat finish quality and he said any boat may have issues with it if it is not maintained properly. Anyways the AICON I am looking seems to have full refit and the current owner put in over $150K in upgrades and repairs.
  14. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    So, why are you here asking for advice? The boat I know of also had gelcoat issues and was new and nearly new. The teak aft deck was slightly sagging and leaked water into the engine room. The boat had numerous electrical issues. They basically had a marine electrician on speed dial. This was around 2009 or so, and boat was new and within 2 years old when I last heard from him.
  15. AffrayedKnot

    AffrayedKnot Senior Member

    Joined:
    Apr 21, 2009
    Messages:
    224
    Location:
    NYC
    Back in the day... 2012 :)
    We bought a hand full of off-lease repos from BNP Paribas and UniCredit.
    Included in the fleet were Aicon 72/25, 64/27, 64/31, 56/91, & 56/98.
    All were relatively low hours and in good shape. I found no noticeable deficiencies in any of these.
    Did they have a Pershing finish... No
    Did they have firmness of a Hatteras or Bertram... No
    They were a solid value for their price range and service category.
    The 72 and one of the 64's traveled on their own hulls from Venice to Beirut comfortably and without incident.
    The 56's made way from Marbella to Beirut, again smooth and uneventful.
    The second 64 remained on the west coast of Italy for 1 successful charter season, and then sold in Italy.
    My experiences with these boats were good.
    I still have contact with the subsequent owners of the 72 and one of the 56's... they love their boats.
    However, each are meticulously maintained with an open checkbook.

    With all of this written... It's a boat.
    Know what you are Buying, and know the Market that you are buying into.
    Good Luck
  16. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Short answer yes, that's what I meant.

    But leaving aside hearsay, here's what I can confirm you first hand.
    Not so much on the 64, I'm afraid - of which I've only seen one, and not in detail.
    But the 56 has been in my radar a few years ago, before I eventually bought something else, so I inspected five of them, no less.
    And their most remarkable feature was the lack of build consistency.
    Every time I entered the engine room of an Aicon 56, it was always a surprise.
    The powerplant was actually good, because back in those days MAN was by far the more popular choice of many builders in the 800hp power node, but for some reason Aicon instead went for the Cat 3406 (C15 in the later years), which was a good engine indeed.
    But in all of those five boats I've seen some sort of structural defects, and every time different - be it piping, fire suppression system, cabling, exhaust...
    Up to a cracked windshield glass, which according to the owner happened just a few weeks before, out of nowhere, while the boat was moored in her berth - go figure.
    One peculiarity which I think was true for all their models are the flush switch panels, very nice aesthetically, but which were built by a company that doesn't exist anymore.
    In four of the boats I've seen, these panels were defective to some extent, and in the fifth the owner had enough of them to the point that he replaced them all, at high cost because that required an extensive re-wiring.

    Bottom line, since the boat I was looking for was meant to be a keeper (possibly up to when I will be tired of boating, hopefully later rather than sooner!), I was rather scared at the thought of what I could NOT see, which could be even worse than what I could see, and I ruled out the model and the builder altogether.

    All that said, anything can be fixed.
    If you really like the boat (and I must say that my wife did like the 56, in terms of layout and interior finishing), I wouldn't go as far as suggesting you to walk away no matter what.
    But pretty sure I would want to spend several hours onboard, leaving no hatch unlifted.
    And even if I wouldn't find anything too worrying, I would still look for the best surveyor I can find, sparing no expense for that.

    All the best for your search!
  17. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Just another thought:
    when I said that I can think of many other Italian builders whose boats were better built, before you ask, most of them never sold in the US.
    So, some of the names I could mention would mean nothing to you, and also if you would come across one of them that someone moved from the Med to the US for some reason, I don't think it would be wise to go for a boat which would make life much harder in case of any need of support.
    But for instance Ferretti, Uniesse and Azimut are all builders whose presence in the US is (or at least has been, for Uniesse) significant.
    And if I think of their flybridge models of the same vintage and size of the Aicon 64, I would definitely prefer any of those to the Aicon, in principle.
    Ferretti 630, Uniesse 65 and Azimut 62 are all boats which (in this order of preference, imho) are more worth considering than the Aicon 64.
  18. OceanDay

    OceanDay Member

    Joined:
    Dec 20, 2020
    Messages:
    40
    Location:
    Worldwide
    Mapism,

    The Aicon which I am looking into has been really well refit and the owner spent over $150K in upgrades. It is fully loaded AICON and all fabric replaced some of the most major electrical components were replaced with American Made brand and if I still plan to go for it I will make sure a hard core survey is done on the overall and on the mechanical to make sure nothing major is going on.
  19. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Well, if I think of all the 56 I've seen, all of them a few years older than 2009, actually I wouldn't have thought to spend a lot (if anything) in interior refitting, fabric, and that sort of stuff. All of them still had the original interiors, and in reasonably good conditions.
    It's rather in the technical department, that I would have wanted to replace and/or redesign a lot of components, electrical system being an example but not the only one.
    Anyway, as I understand you seem to like the boat and to be willing to go ahead, so I can only repeat myself and wish you all the best!
    If you will feel like updating us on your findings, maybe also with pics, I'm sure I wouldn't be the only one interested to read that with interest.
  20. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    "I get that a 2009 hull that didn't see service until 2012 may have an attractive price point. But the fact that the factory closed in 2012 has nothing to do with why it sat unsold since 2009. Boats don't sell because there is something wrong with them or they are overpriced.

    Is there any other reason boats don't sell?"

    No comment pro or con Aicon as I've only been on one, but I want to point out that there is another reason boats don't sell. 2008 / 09 was when the economy crashed. I don't like hearing about the gelcoat issue, but by 12 years old there's a good chance you're dealing with a paint job anyway. You know there won't be much support for these boats, same as with a lot of boats,but beyond that I'd say the boat stands on its own. Check it well, get a good surveyor and see where it goes.
    Last edited: Dec 29, 2020
Thread Status:
Not open for further replies.