Click for Delta Click for MotorCheck Click for YF Listing Service Click for JetForums Click for Mag Bay

Looking for Vents

Discussion in 'Carver Yacht' started by foresail, Oct 12, 2014.

You need to be registered and signed in to view this content.
  1. foresail

    foresail New Member

    Joined:
    Sep 22, 2014
    Messages:
    9
    Location:
    Highport Marina on Lake Texoma
    I have a '88 4207 - I'm looking to replace the vents that vent the engine room and mount on each side of the hull. Can anyone recommend a source?
  2. g36

    g36 Member

    Joined:
    Aug 7, 2013
    Messages:
    70
    Location:
    chattanooga
    i believe they are made by attwood. if you take a look back on the pictures post at my 405flybridge pic (a few post above yours) you will see some plastic vents mounted vertically on the left side of the pic. although these are allowing air circulation on my flybridge from what i can see of your boat pics they look alot like what you have on the sides of your hull with just a few put end to end. you can also call carver parts they will be able to tell you who the manufacturer is.
    also try plastic boat vents in google images search and see what you get
    what about this one?

    http://www.atlanticmarinedepot.com/vents-boat-bilge-vent-louver-marine-bayliner-searay-p-1453.html
  3. MysticDolphin

    MysticDolphin Member

    Joined:
    Nov 3, 2011
    Messages:
    98
    Location:
    Lake Texoma
    west marine i think.. measure and replace..
  4. foresail

    foresail New Member

    Joined:
    Sep 22, 2014
    Messages:
    9
    Location:
    Highport Marina on Lake Texoma
    Found on iBoatcom
  5. foresail

    foresail New Member

    Joined:
    Sep 22, 2014
    Messages:
    9
    Location:
    Highport Marina on Lake Texoma
    Thanks for response - I found replacements thru Carver Yachts - they were very helpful
  6. g36

    g36 Member

    Joined:
    Aug 7, 2013
    Messages:
    70
    Location:
    chattanooga
    did they turn out to be attwood vents?