Click for Westport Click for Nordhavn Click for Mulder Click for Nordhavn Click for Ocean Alexander

506 Sealand Vacuum head issue

Discussion in 'Technical Discussion' started by CSkipR, Jun 6, 2014.

You need to be registered and signed in to view this content.
  1. CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Tonight it appears that the vacuum pump on my head has quit working. Its still getting fresh water okay and the seal is fine just no vacuum pump making its noise. Assume the pump is bad. Does this require replacing just the motor or the whole pump assembly?
    Is there anything else that might cause the pump to quit working. Breaker is on and will check for voltage tomorrow but assume it is okay.
  2. Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,458
    Location:
    Sarasota/Ft. Lauderdale FL
    Check the vacuum switch. If it is not working the pump will not come on.

    And check if there is a fuse for the pump as well.
  3. CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Determined problem. It was not related to the pump. Unfortunately its the battery charger and the whole 24v system is down. Will post for any advice.
  4. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,166
    Location:
    Miami, FL
    Install a blue sea digital volt meter with alarm in a place where you can easily see it... Saloon, galley, wherever you spend a lot of time. Way too often meters are buried behind solid doors where you can't see then until notice the lights are dim .. The blue seas have a buzzer alarm you can set..
  5. Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,332
    Location:
    I dunno