Click for Nordhavn Click for Mulder Click for Ocean Alexander Click for YF Listing Service Click for Abeking

Squeegees !

Discussion in 'Technical Discussion' started by John Sakovits, May 20, 2018.

You need to be registered and signed in to view this content.
  1. John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    what manufacturer and size of window squeeze do you use?

    Thanks!
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    For glass or curtains?
  3. John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    Glass.

    Thanks
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    Any cheap squeegee from wallmart will do. I like the 6 to 8" cheap ones but if you have to reach a lot, as wide as you can make it work.
    I hope that was near what you were asking.
    Never use a squeegee on eisen or flexible curtain windows Soft & clean chamois only.
  5. CR CRUISER

    CR CRUISER Member

    Joined:
    Dec 18, 2009
    Messages:
    34
    Location:
    Campbell River, BC
    Don't use a cheap squeegee with an aluminum frame. Anywhere the aluminum touches the glass will leave a scratch or deposit that is just about impossible to remove.
  6. MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    I find the "shower" ones work well.
    All plastic .
  7. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    Yep, Yep, Yep...
  8. jayjay

    jayjay New Member

    Joined:
    Jan 6, 2016
    Messages:
    11
    Location:
    Riviera Beach
    Ettore 8 in. Original Squeegee. All metal, no plastic.
    $6 at Home Depot or Amazon.
    Sizes from 6 to 18 inches.

    Rubber blade is replaceable, You can turn it over one time for a fresh edge.
    Two drops of dish detergent in a spray bottle and you are ready to go.
    I've had mine for 10+ years. They are stainless and made in USA.