1. mike benner, Mar 23, 2018

   #1

   

   mike benner New Member

   Joined:

   Mar 20, 2018

   Messages:

   5

   Location:

   Central Florida

   Any tips for re-stretching or replacing sagging wall vinyl in 90's model Carvers? It appears to be a common problem.
2. Poppa John, Mar 27, 2018

   #2

   

   Poppa John New Member

   Joined:

   Sep 4, 2012

   Messages:

   30

   Location:

   Naples Florida

   It may have been installed using contact cement. Try applying heat, using a hair dryer on low setting. Keep moving it around to avoid burning. Then press by rubbing with your hands. This should reactivate the glue. Good luck.

   Last edited: Mar 27, 2018
3. mike benner, Apr 2, 2018

   #3

   

   mike benner New Member

   Joined:

   Mar 20, 2018

   Messages:

   5

   Location:

   Central Florida

   Thank you, I'll give it a try
4. Poppa John, Apr 2, 2018

   #4

   

   Poppa John New Member

   Joined:

   Sep 4, 2012

   Messages:

   30

   Location:

   Naples Florida

   Your welcome, let us know if it helped.
5. Capt Ralph, Apr 2, 2018

   #5

   

   Capt Ralph Senior Member

   Joined:

   Sep 8, 2004

   Messages:

   13,677

   Location:

   Satsuma, FL

   Some material coverings had a mat between the finish treatment and the bulkhead. The finish fell like ole Rose; https://en.wikipedia.org/wiki/Mary_Millar
   
   You may not get enough glue in between the bulkhead and the finish cover.
   You may consider a new bulkhead cover entirely for your taste.
6. mike benner, Apr 2, 2018

   #6

   

   mike benner New Member

   Joined:

   Mar 20, 2018

   Messages:

   5

   Location:

   Central Florida

   If this fix doesn't work, I'm considering replacing with Teakwood film

Your name or email address:

Do you already have an account?

• No, create an account now.
• Yes, my password is:
• Forgot your password?

Stay logged in