Click for Cross Click for Delta Click for JetForums Click for Furuno Click for YF Listing Service

Hull reflection on a Lurssen

Discussion in 'Lurssen Yacht' started by Shineman, Apr 16, 2008.

You need to be registered and signed in to view this content.
  1. Shineman, Apr 16, 2008
    #1
    Shineman

    Shineman Guest

    I have just cleaned and machined a hull on a large Lurssen mega yacht, thought you would like to see the reflection i achieved.

    Attached Files:

  2. NYCAP123, Apr 16, 2008
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Pride in one's work...It's a wonderful thing.
    Had a yard recently recommend Liquid Glass. Person that does our boat uses collinite and prefers as longer lasting, but says Liquid Glass good. Any Opinion? This is on a Viking SC (Princess)
  3. Shineman, Apr 17, 2008
    #3
    Shineman

    Shineman Guest

    I have heard of Collinite but not the other, i used a different wax on this job im waiting to see the longevity of it before i can recommend it.

    I did this over in the Indian ocean so it was a hard slog with the heat but the products i used still worked well.

    Here is a 50/50 of the hull before and after machine polishing ready for waxing.

    Attached Files:

  4. K1W1, Apr 17, 2008
    #4
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,393
    Location:
    My Office
    Hi,

    Tha shine looks good but was it a gray boat or a white one before you started?
  5. Shineman, Apr 18, 2008
    #5
    Shineman

    Shineman Guest

    Well its a white yacht, but the hull was covered in bad exhaust fumes making it look grey and dirty.