Click for Furuno Click for Ocean Alexander Click for Westport Click for Mag Bay Click for Glendinning

1986 35' gas, shafts and rudder zincs.

Discussion in 'Viking Yacht' started by JoAnne yatch, Apr 19, 2020.

You need to be registered and signed in to view this content.
  1. JoAnne yatch, Apr 19, 2020
    #1
    JoAnne yatch

    JoAnne yatch New Member

    Joined:
    Apr 3, 2020
    Messages:
    3
    Location:
    New York Long Island
    Viking 1986 gas engines.
    looking for help on the size of the shaft zincs, and rudder zincs size
  2. steveg_nh, Apr 19, 2020
    #2
    steveg_nh

    steveg_nh Member

    Joined:
    Mar 20, 2018
    Messages:
    43
    Location:
    NH
    Shafts should be 1.5”. Rudders 5”. Trim tabs 2.5 or 3”, either should be fine. Bonding plate on back of boat 6x12”. Engine exchanger for crusaders are likely 3/8”x2” and engine oil coolers likely 1/4”x1.75”. This is what’s on my 1989 35 with gas engines. You should double check that these all fit and that you do have 1.5” shafts. I recommend boatzincs.com. Good luck.
    Last edited: Apr 19, 2020
  3. JoAnne yatch, Apr 19, 2020
    #3
    JoAnne yatch

    JoAnne yatch New Member

    Joined:
    Apr 3, 2020
    Messages:
    3
    Location:
    New York Long Island
    Thank you for all the information, the sale should be in two weeks.
  4. NYCAP123, Apr 19, 2020
    #4
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Welcome to YF. Good luck with your new boat. Great info real fast Steveg_nh
  5. Capt Ralph, Apr 19, 2020
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,737
    Location:
    Satsuma, FL
    Safe cruising on your new boat.

    The Viking factory is still open and offers support.
    They just need the hull number and can tell you all about your new ship.