that's right the photos I posted are of cr900 head and valves
So our mechanic recommended pulling all the heads and sending them to TX for inspection as that is the only way to put eyes on the valves and...
The first photo is the head with the circled exhaust valve that was measuring very high during the valve lashing. The second is the worn valve....
Mod Edit: images reduced to fit our format. Please read the rules on image sizes.
Update: this wedge has made some difference in a loaded condition running, the boat does have some bow steer when its light so I back off tab to...
Just expect more than you think to bring any overdue MAN or any marine diesel back to good condition. We had our 2848-423 (CR900's) serviced back...
Possibly we aren't within 500ft of other boats the bonding wires on the strut and shafts are intact. The pitting is in the exact same spot on base...
They've probably been repaired in the past, they're 18 yrs old
Above is the pitting I had fixed it was at the base of all 4 blades on stbd and 1 blade on the port
[ATTACH] [ATTACH]
[ATTACH]
Our prop guy looked at them said it was pretty common, going to weld them. Really want the 5 blade veems
Noticed pitting on the base of all four blades of our stbd wheel and one blade base of the port wheel all in the exact same location. About the...
The 43 has no problem getting on plane. In a loaded condition the stern is just very heavy I doubt adding tab angle helps much but we'll see. Side...
those combo washer dryers do not work well, really do the research may not be worth it
Have the boat out of the water now so going add an 1" or 2" wedge
We got our 43FB about 2 years ago as well, very pleased with the MAN CR900's in that boat. We came from an older hatteras with Detroits so a big...
Definitely can be unsafe if too much but it feels like the boat needs a few more inches of tab to get it to run better. We put a 1,050lb bladder...
It's a 43Cabo FB I'll have to measure how much the tab goes down when we pull it out in a few months. You know that feeling when a boat gets up on...
Have any 43FB owners changed to larger trim tabs or installed wedges between the tab and ram to give them more downward angle? I've noticed the...