Bubbe Locke did my 50 from this photo. He does great work. Have to click on the below to see it for some reason...
Hey Seth - How do you keep them from flying around underway? We probably won't use much either but we're paying for an extra DTV box to drive...
Yeah, this is a salon TV in a 46. My problem is master and forward staterooms in a 50. Thanks!
Beau - Understand - you have the same problem I do!!! Hopefully we will get some good replies!!! I suck as a cabinet maker!!!
Anyone done this well? Small TVs built into side master and bow stateroom waaaay overdue for replacement but the "built in" to the teak cabinetry...
Totally agree with your 671TIB 485 assessment UNLESS they have had new cylinder kits which gives them the ability to run up more hours. While I...
Big Chief - I had a 1985 46 Post with 671TI @ 450HP each for sixteen years. This is the "old" hull, NOT the newer hull that started around 88....
Looks like you have already checked this area, but, I had this exact same leak on my 2001 50 and it was a loose fresh water system "T", port side...
OK, final analysis after Cat guys on the boat. Two sea trials with computer hooked up and TPS units replaced. Now have full throttle response...
Bottom and props clean and wheels just redone in order to hit 2300 WOT full load which they are not. CAT boys analysing data now.
Something is up with my rig. At 1850 I am always at 30-31 gph. CAT guys on boat now and sea trailed to gather all data yesterday. Installing...
Boost on one is 23 and 24 on the other @1850.
Boost 23-24 @ 1850RPM
Thanks for all the responses Gents. On the fuel burn from Capt. J - does the calculation take fuel returned to the tanks into consideration?...
Unloaded WOT port 2415, starboard 2370 with "throttle sensor calibration" code thrown
Will get this...
Boat ran with both engines at exact same GPH before the wheel job.
Clutches? You mean in gear or what?
Have to get boost numbers next time out. When I am running around 1850, 26 knots, both were showing 29-31 GPH (usually both steady @ 30) but both...
Had our 50 pulled for a bunch of work to include dialing in props to rated WOT RPM of 2300. CAT survey showed 2240 +/- 20. Not very exact...