Your issues are voltage related. Start from the batteries and work your way thru the main battery system. Do not overlook or assume anything. Most...
Lets look at it this way. #1 the prop moves the boat. Next in order to move this boat at 10 knots you can use a 550 hp engine to turn a 26X26 prop...
High load conditions with blocked aftercooler will raise cylinder temps. The aftercooler is designed to cool the incomming air. An increase in...
Ok then. With your example lets do this. Take a 50 foot Bertram with Detroit Diesel 8v92 TAB's rated at 735HP@2300 rpms. Using 28X30 props. This...
Cummins 480CE is no longer available. Cummins Diamond 450 8.3C is the engine of choice here both on cost and parts availability. The Bertram 37...
Did your mechanics replace the lip seal behind the pilot bearing?
9 out of 10 valve seat failures resulted from overloading the engine. Overload will cause high cylinder temperatures. Cooling capabilities do not...
Fuel used is controled by the throttle. Simple. Installing injectors smaller than what is curently being used is not going to save anything. It...
Aftercooler maintenance is directly related to marine age and raw water exposure. Engine hours doesnt mean anything. If properly maintained they...
The allison transmission will aerate the oil if it is low. The proper level is full while the engine is running in neutral. Be sure to check this...
.jpg&contenttype=jpeg "Click for Abeking")