Thank you for the replies Oil level is correct and screens are clean Will try the adjustment screw under the cap and report back Thanks again :)
We have a transmission running at 80 psi which should be around 120 - 140 There is a nut on the side with a another nut inside with a spring...
Count us in for 2:)
Gerogian Bay Echo Bay 2010
Try Brydon Marine in Barrie, probably have them in stock 25 Saunders Road Barrie, ON L4N 9A7, Canada (705) 722-6431
Any more pictures of your wing doors and aft deck, just doing ours and trying to get ideas
I am in Ontario, Lake Simcoe restoring a 57' aluminum roamer, drop in here to get ideas when I get a chance
Shaft Log Repair We had a problem on our aluminum shaft log and what we did was took a composite cuttless bearing and reamed out the rubber, then...
Your right , the real information you need will be in the survey My teak deck was also covered in fibreglass. The end result was we needed to...
Restoration It depends on how much of the work you will do yourself, I can tell you it is not a one man job Also depends on how much rot there...
I used the traditional grey glazing putty you can buy in rolls at Home Depot You can still remove the windows later if need be It also flexes...
Mark Thanks for the input :) I will see what I can find in Canada Rob Kennedy
Have just discovered this informative site We are restoring a 1967 Roamer 57' and are curious if anyone has replaced motor mounts and could share...
