The older Hatteras MY's were built very well, as Pascal eluded to. Fiberglass fuel, waste and water tanks, copper freshwater plumbing, good...
It depends where in the country or world you are. In Tennessee or some parts of the Great lakes or other areas, a 45' boat would be called a...
Make sure to get the hull audio gauged. Check the hull thickness especially under the tanks and shaft logs.
Follow the hose from the sump box?
The Sunseeker 66' is a far superior boat than the L650 fly in every aspect. From quality to seakeeping.
Trident or Sheilds and absolutely wire bound. Corregated wire bound IF sharp bends are needed.
That's easy, register it to your tender!!! :D
The breaker for the shorepower cord "should" be accessible. Look there to see how many wires your cord is, or ie follow the cord after it leaves...
If you order the cable from Glenndenning in comes in the correct gauge and type, but you do need to confirm 3 or 4 wire. The 100' is a little...
They come in 75' and 100' lengths, you can always shorten a 100' cord to make it fit and it's only $100 or so dollars for the longer cord. Viking...
Send me a private message with contact info. I am located in Pompano Beach,FL which is quite a ways away from Morehead City. But I could get it...
I just did that if 18' of water in the ocean off of miami, except had to find a 110lb anchor, 30' of chain and like 15' of rope, took hours going...
There is a ship that loads in the Northeast once or twice a year and then will ship to Ensenada, I think its Sevenstar. I could run it down from...
That's the problem with hydraulic.
I honestly don't think there is another way. I recently recovered a 110lb anchor with 25' of 1/2" chain. It was near impossible for 2 of us to...
If the Westerbroke runs fine, then just run it till it breaks, oil samples who cares....... Phazor makes the closest footprint to most...
Mans would be my first choice and the best choice. Nobody does the 1000hr service every 3 years unless you're actually doing 1000 hrs. More like...
I would leave it, BUT what changed to gain 80 rpms? Also what was your fuel and water load?
Yes, those are the same motors as the 1550's. But not sure which tech you'd ever find to flash them.
Very nice!!!!!!!!!
