I am always at how people ask questions without bothering giving us information. in this case... WHERE THE HELL ARE YOU LOCATED AND WHAT KIND OF...
One thing about chillers is that it takes a little longer than splits to get things cooling as you have to get the water down to temp. Also...
That’s why I m a big fan of chillers. You get more flexibility and redundancy. I converted my old 53 to chillers 4 years ago and it was so worth...
Loose cable, pos or neg, battery switch issue, corrosion. No way it could affect the chillers.
It would help if you would bother telling us what brand chillers you have ... Depending on outside and water temp you may be able to get the boat...
For sale, two Sea Doo GTI 155 SE. one 2011 with 72 hours, one 2013 with 25 hours. Just serviced with new plugs and batteries, both run very well....
And also what temperatures are you seeing for the chilled water loop? sometimes if shore power is iffy I have to shut down one chiller. In the...
Some people argue that too much flow means less time for the water to soak the heat in the coil. I guess it s true if you go way over size. As...
Stick vs screen is personal preference. Actually the FLIR plugs in the garmin network easily. Since I run the boat a lot at night I just don’t...
I like to keep things separated with back ups. I don’t want a single item to bring everything down. For instance we have an older Simrad radar...
The struggle is that now FLIR requires a PC to program the IP to Video/HDMI converter but not just any PC. You have to use a browser and a...
Yes I do because I m not outputting the FLIR on the Garmin touch screens. Instead it is going to non touch screens monitor plus, I find it much...
Genset output doesn’t go thru isolation transformers. It only affects voltage anyway, not freq. Maybe a voltage drop is causing issues but then...
One issue we have here in so do especially after a haul out is a bunch of small white mussel like shells dying in the lines and manifold then...
I have 4 monitors plus two new garmin touch screens. Existing setup didn’t make much sense so we had to switch some things around. Now I have it...
Actually M232 is still 320x240 ... it s just that they could have easily build in an HDMI or video out in the joystick unit. and don’t get me...
Yep... had a similar issue years ago with the same controls/engines/gear. There is a cable between the Morse servo and the lever on the gear....
Cat did just that on the 3412s...
Just had an electronic tech I ve used many times over the years install a new FLIR M232. We run a lot at night so it’s needed with an enclosed PH...
No idea but I guess there isn’t much demand for the larger size bowls
_2.jpg&contenttype=jpeg "Click for YF Listing Service")