I ended up not going with Soundown. I had it before but when we pulled it up it was falling apart. The previous owner of my boat did not take very...
I was surprised how involved my install was. Even though I went with all Simrad so it would be “plug n play”, there was still a lot to do....
As others have suggested, there is no real way to ballpark this. You’ll have to get them to come out and look and quote. Even then, be prepared...
After much consideration I decided to go with the GOST system. The additional monitoring capability and SAT tracking is appealing. They were good...
Any update on how you changed the strips and what difference they made? Thanks!
I removed my SSB during winter projects. Just never got used and I carry a SAT phone for emergencies if out of VHF range. Not many folks using SSB...
What did you replace it with?
You likely would get no smoke at all as long as you turn on your block heaters 24 hrs prior to starting. My 12v92's never smoked as long they were...
That chain is ugly for its age. I have 8 year old chain that looks way better and I anchor a lot too.
My machine came with a selector valve to switch between saltwater and freshwater. A simple 1/4 turn of the valve switches it. The valve is on top...
Please post what you decide on change method and more importantly the results. I just put on Veems and whereas I currently don’t need to change...
I originally bought my IceSea unit so I could make ice from sea water as my watermaker was old and unreliable. However, I recently installed a new...
Most of us on here are DIY'ers and of limited budget. Totally understand your need to prioritize oand decide what you can do. Most of what we were...
spinning the shafts in your struts doesn't mean it is aligned to the engine/trans correctly. You had sloppy bearings and now tight bearings. The...
Well to each his own. I hope you get lucky. Setting the shaft on a block doesn' t hold it in place. But putting that aside, you just put in new...
Are you planning to check alignment? Rough it in while still on the blocks then final check and adjust after being in the water at least 24 hrs. ?
Are you planning to check the alignment? Rough it in while still on the blocks then final check and adjust after being in the water minimum 24 hrs. ?
Yes. It is a little finicky occasionally but generally works well. We had to install an AMOT valve because of our cold water temps. A friend of...
I have a fish box ice maker. Love it! I like to put some water in the box then turn on ice machine and make a slurry. Cools the fish down faster....
Took me awhile to figure out why all the comments about heat and burning feet. Then I realized you all do your boating barefoot :). I've been...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")