Thank you for the replies
Oil level is correct and screens are clean
Will try the adjustment screw under the cap and report back
Thanks again :)
We have a transmission running at 80 psi which should be around 120 - 140
There is a nut on the side with a another nut inside with a spring...
Count us in for 2:)
Echo Bay 2010
Try Brydon Marine in Barrie, probably have them in stock
25 Saunders Road
Barrie, ON L4N 9A7, Canada
Any more pictures of your wing doors and aft deck, just doing ours and trying to get ideas
I am in Ontario, Lake Simcoe restoring a 57' aluminum roamer, drop in here to get ideas when I get a chance
Shaft Log Repair
We had a problem on our aluminum shaft log and what we did was took a composite cuttless bearing and reamed out the rubber, then...
Your right , the real information you need will be in the survey
My teak deck was also covered in fibreglass. The end result was we needed to...
It depends on how much of the work you will do yourself, I can tell you it is not a one man job
Also depends on how much rot there...
I used the traditional grey glazing putty you can buy in rolls at Home Depot
You can still remove the windows later if need be
It also flexes...
Thanks for the input :)
I will see what I can find in Canada
Have just discovered this informative site
We are restoring a 1967 Roamer 57' and are curious if anyone has replaced motor mounts and could share...