I believe all 3 chillers are new and were replaced together.
Tried using only line 1 with the third chiller only on (the one most outboard) and it worked.
Don't know why?
The shore end is not factory
PS. The boat has an isolation transformer on line one.
Had a marine electrician on boat today.
Everything should work with one 50 amp cord if not drawing more than 50 amps.
We shut off all power...
This is with the gen running
Shore power off[ATTACH]
But it is 50 amp 125/250v
If I used a y adaptor connecting the boats two 50 amp cords to a single 50 would that work?
The boat does have isolation transformers but I do not know how that affects my issues of extending the power cord or running off one 50 amp cord
I am finally back on my boat (2008 62' Neptunus) bought in Ft Laud this summer and moved to Sarasota(with Capt Andrew). Capt J knows the boat-...
I have been boating since I can remember and have owned various single engine outboard boats my whole life. I only started operating large boats...
Does anyone have an idea of what a new C18 cat engine would cost? 1050hp
I would like to cut out a piece of railing on my 62' Neptunus to allow for side boarding.
I would replace the piece cut out with a SS cord and...
It pops at under 15 amps. works fine with genset. However I can run everything else on the line (stove, hot water, refrig, etc and get up to...
The boat has 3 chillers that are fairly new.
The problem is that the manual says I should be able to run some AC off the main shore power cable,...
Thanks so much for that great advise. Do you know any marine electricians in the Sarasota area?
How about Marlow?
Thank you so much for that info.
We are doing a survey and are using the people you recommended.
22 knots at 2000 rpm