5200 doesn't like UV. The proper installation, to me, would be to bed with 5200, clean the residue well, then beauty bead the exposed edge with a...
Yes. Turbo, cooler....something either not producing or obstructing ramped up air requirements.
Prop speed, application technique is critical. But divers merely wipe the surface to clean. Rarely if ever do they need any tools to remove any...
I'll chime in to suggest you consider a completely separate system, cameras in the cockpit, up on the tower, engine room, etc. Perhaps a...
I ask because it keeps my rates down in the 1% range, actually a hair under. Yes, I spend more than that on seasonal dockage alone, but in...
Do you have access to seasonal relocation mitigation to lessen the risks for the underwriter? Ie, Florida waters has the north-of-Savana-River...
Agreed, in that my mains and genny's all function with sea strainers but fed from similar screen wedge coverings. I installed a bronze T in my...
Try to time your diver with a shut down and avoid pulling up all of the crap he shakes loose. I'm not a fan of your direction, bit to each his...
more or less this is our regular routine on 12’s.
I have DD, but not the 6. Our procedure is to remove all pencil zincs. shut down the raw intake, plumb the zinc at the water pump intake to a 5...
Two degrees can be the difference if already stressed by hot seasonal water. Only one unit is tripping? I'm still in the camp staring at your...
And all three coils are reading the same, all three coils sit on the same plane of installation?
...but in the end I think you'll find that your breakers are fine, guilty of doing what they were designed to do. Mine as well.
...and I'm telling you this as much as I'm asking, learning here. My issue was very similar to what you're explaining, it seems, and mine was...
Ok, so different source, but technically the same issue driving the breaker trip. The breaker is tripping to save your gear, and the amp...
Ok, so after a thorough Red Line cleaning of strainer, pumps, and coils...I see lower discharge temps with the heat gun, lower amps on each leg of...
Ok, throwing this out there, as it's a new issue for me as well. One of my units is tripping the same breaker. It will run for a while, but...
I agree that Id pick the first one. That heater is designed to get hot, handle the temps. My guess as well is that the heater failure lead to a...
I use the same breakers and just recently replaced one that had gotten hit with some salt water from the water maker tantrum....
You want to go with the SP. Supplementary Protector, designed to provide additional circuitry protection for sensitive electronic systems, like...
