Click for Westport Click for Burger Click for YF Listing Service Click for Cross Click for Northern Lights

12v-71n Water Pump Oil Seal Replacement

Discussion in 'Engines' started by PPD, Oct 26, 2026 at 9:33 PM.

You need to be registered and signed in to view this content.
  1. PPD

    PPD Member

    Joined:
    May 17, 2020
    Messages:
    93
    Location:
    CT
    Looks like the oil seal on my port engine water pump went. Starting to weep oil from the weep hole on the backside of the pump. Does anyone know of any special tips or tricks to this task that I should be aware of before I pull it off? This is my first time working on one off the detroits.
    Thanks
  2. boatpoor

    boatpoor Senior Member

    Joined:
    May 4, 2016
    Messages:
    305
    Location:
    32407
    They are pretty simple pumps. If you got the original engine manuals just follow the instructions.
  3. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,898
    Location:
    Fort Lauderdale
    Make sure the bearing isn't going out, as that will cause the oil seal to start leaking.
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,578
    Location:
    Satsuma, FL
    Rear raw water pump oil seal?
    Sometimes can be confused with the rear tach sender leaking oil.
    Sometimes the back of the heads leaking also. Also oil leaking down from the blower drive, blowers and throttle control leaking down hill.
    Takes some crawling back there to carefully follow the oil trail.
    Usually easy work. When in doubt, look at the pictures.

    Oil seal behind the front coolant circulating pump?
    Rare failure.
    Usually the head end bolts holding the thermostat housing, that lil hose between the governor housing and the head, PTO across from the coolant circulating pump can sling oil that way, valve cover gasket or something else leaking oil up front.