Click for Northern Lights Click for Burger Click for Walker Click for Westport Click for CL Yachts 99X

Pounding on port hull wall on 63 viking motor yacht

Discussion in 'Engines' started by jmoore, Oct 21, 2026 at 11:50 AM.

You need to be registered and signed in to view this content.
  1. jmoore

    jmoore New Member

    Joined:
    Sep 12, 2026
    Messages:
    2
    Location:
    Omaha
    Boat has 12V71TAB's. Around 1600 to 1800 rpm there is a heavy pounding sound by the port engine exhaust that shakes the shows up in master state room with the drawers moving about 1/8 - 1/4" horizontally. With foot on the strut mtg plate do not feel anything. Trying to figure out if its coming from the exhaust system on the exterior of the boat or where it could be coming from.

    Thanks
  2. boatpoor

    boatpoor Senior Member

    Joined:
    May 4, 2016
    Messages:
    303
    Location:
    32407
    What kind of frequency and is it steady at a constant RPM ?
  3. jmoore

    jmoore New Member

    Joined:
    Sep 12, 2026
    Messages:
    2
    Location:
    Omaha
    I would say every second to 1.5 seconds. Intensity/strength seemed to increase as the boat leaned or dipped to the port side also.

    Thx
  4. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,949
    Location:
    South Florida
    I'm not sure if this is related but from an exterior position, you can hear older Viking motor yachts coming from from a mile away (or more). Likely the loudest yacht I heard in my 3 years living on the intracoastal circa 2007-2010. Most of the noise was the engine pounding the hull but there was also a distinct exhaust resonance. This was 20 years ago so I can't recall with much detail. For reference, below is an example of the boat I'm talking about. I also eluded to the noise in the Yacht Flocking thread, here...

    https://www.yachtforums.com/threads/yacht-flocking.5952/page-8#post-38014

    Attached Files: