Click for JetForums Click for Delta Click for Abeking Click for Burger Click for Northern Lights

Looking for someone to service my watermaker in Stuart area.

Discussion in 'General Yachting Discussion' started by Boater2000, Feb 5, 2026 at 5:28 PM.

You need to be registered and signed in to view this content.
  1. Boater2000, Feb 5, 2026 at 5:28 PM
    #1
    Boater2000

    Boater2000 New Member

    Joined:
    Dec 23, 2025
    Messages:
    2
    Location:
    Charleston
    Looking for recommendations for a company or person to service and repair my watermaker while my boat is in Stuart. I have a Sea Recovery Aqua Whisper Compact 800GPD model.

    Thanks so much!
  2. Capt Ralph, Feb 5, 2026 at 6:19 PM
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,192
    Location:
    Satsuma, FL
    Is this for the recommended scheduled service or is there a problem to repair?
  3. Boater2000, Feb 5, 2026 at 6:40 PM
    #3
    Boater2000

    Boater2000 New Member

    Joined:
    Dec 23, 2025
    Messages:
    2
    Location:
    Charleston
    A little of both but mostly I have a low pressure fault and I have done all that I know to do to check to time to have someone with a bit more knowledge and experience to check it out.
    Thanks
  4. Capt Ralph, Feb 5, 2026 at 6:52 PM
    #4
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,192
    Location:
    Satsuma, FL
    Low pressure faults are usually from a restricted raw water inlet.
    Are you on a dive service? Strainer clear?
    If you can not find anybody local, I will be making a trip to Cocoa soon for another customer.
    I can come further down and offer my services.
    PM me if needed.
  5. Pascal, Feb 5, 2026 at 7:10 PM
    #5
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,813
    Location:
    Miami, FL
    Pull the check valve where the fresh water flush Tees into the feed hose. I ve had issues there where debris would make it past the strainer and jam the valve