Click for YF Listing Service Click for Perko Click for Abeking Click for Nordhavn Click for Burger

cost of Cat aftercoolers

Discussion in 'Engines' started by boaterholic, Dec 23, 2025 at 10:42 AM.

You need to be registered and signed in to view this content.
  1. boaterholic, Dec 23, 2025 at 10:42 AM
    #1
    boaterholic

    boaterholic Member

    Joined:
    Jul 20, 2023
    Messages:
    32
    Location:
    Welaka, FL
    Can someone give me approximate cost of replacement aftercoolers for Cat 3196 and Cat C-9's?
    Looking at a couple boats of interest powered with these engines and I'm almost certain they have not been replaced at the Cat recommended 6 year interval.

    Also is there a preferred site to order these coolers from?

    Thank you,
    Victor
  2. Pascal, Dec 23, 2025 at 2:25 PM
    #2
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,797
    Location:
    Miami, FL
    Get an estimate from a Cat Dealer. Cost may depend on whether the housing and pipes have been upgraded to new style, at least that is the case on C32s. Not sure if the housing and pipes are different on the other ones.
  3. boaterholic, Dec 23, 2025 at 3:05 PM
    #3
    boaterholic

    boaterholic Member

    Joined:
    Jul 20, 2023
    Messages:
    32
    Location:
    Welaka, FL
    Ok thanks, checking worst case scenario to factor in offers
  4. Pascal, Dec 23, 2025 at 4:18 PM
    #4
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,797
    Location:
    Miami, FL
    We did them on C32s 10 years ago… it was about 30k including new housing and pipes.
  5. boaterholic, Dec 23, 2025 at 5:34 PM
    #5
    boaterholic

    boaterholic Member

    Joined:
    Jul 20, 2023
    Messages:
    32
    Location:
    Welaka, FL
    Ok thanks. I assume those being larger engines the parts would be a bit more $$$
  6. Capt J, Dec 23, 2025 at 8:14 PM
    #6
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,769
    Location:
    Fort Lauderdale
    If you had a cat dealer do the survey they would have given you a quote. It depends on many factors as Pascal said, and access. I just got quoted $16k total to replace the 4 on a set of 1900hp C32's that already have the new style housings.
  7. boaterholic, Dec 23, 2025 at 8:54 PM
    #7
    boaterholic

    boaterholic Member

    Joined:
    Jul 20, 2023
    Messages:
    32
    Location:
    Welaka, FL
    I’m looking ahead at some different boats, a couple of which have Cat power. So I want to factor in the cost of these coolers that Cat wants replaced every 6 years when I make offers if they have not been recently replaced.
    When I get to the point of survey on one I’ll definitely try to get a Cat certified surveyor to do the engines.
    Is there an easy way to tell if they have newer style housings as I am not familiar? The Cat engine models most likely to end up with for checking if newer or older style housings are: C-9, 3196, 3406, C-12, and possibly 3208.
    Thanks for the help!
  8. Capt Ralph, Dec 23, 2025 at 9:25 PM
    #8
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,109
    Location:
    Satsuma, FL
    OMG, not a 3208.